
履带起重机操作手册
安
全
准
则
Operator’s Manual for Crawler Crane
S
a
fe
ty
G
u
id
e
lin
e
s
3-52
ZCC1100H Crawler Crane
3.9.2.5 Checks after operation
a) When the crawler crane and auxiliary lifting device are in non-working condition, never
park the vehicle near the embankment liable to collapse or low-lying land subject to be
washed away by water.
b) Set down the load on the ground, and if necessary lower the boom frame to some extent;
lock the slewing gear and traveling gear and apply the brake.
c)
Shut down the engine and cut off power.
d) Check if there is leakage in some place and repair it if necessary.
e) Clean such components as movable parts and exposed part of the piston rod of cylinder.
f)
Check if bolts and nuts are fitted tightly. Any defects found should be eliminated at once. It
is prohibited to operate the crane with fault.
g) Record the operating conditions and abnormal symptoms.
h) Check if the quantity of tools and accessories meet specified requirements.
i)
Lock the operator’s cab or safety devices.
j)
Take precaution measures against storm or lightning strikes.
k)
Take precaution measures against frostbite in winter.
WARNING
To avoid engine from freezing in winter, drain all cooling water when park the vehicle, if
no anti-freeze is added into the cooling water.
For reference only.
Operators manual should be consulted and adhered to.
Summary of Contents for ZCC1100
