Zoomlion ZCC1100, Operator'S Manual, Page: 264 / 291

Operator’s Manual for Crawler Crane
Assembly
and
Dismantli
ng
5-58
DANGER
The component numbers of anchoring rods mentioned in “Figure 5-50 Combination of
fixed jib rear anchoring rods (fixed jib angle = 30°)” are consistent with those in the
above table, so the components of anchoring rods can be found by referring to the
component numbers during assembling.
The combination of fixed jib rear anchoring rods when fixed jib is mounted in the angle of 10° to
main boom is different from that when fixed jib is mounted in the angle of 30° to main boom.
When fixed jib is mounted in the angle of 10° to main boom, a 2'11" (900mm) anchoring rod
must be removed.
When fixed jib angle is 30°or 10°, the combination of fixed jib rear anchoring rods is shown in
the figure 5-51.
4'11''( 1513mm)
26’5’’(8060mm)
23’6’’(7160mm)
19.7''(500mm) 11.8''(300mm)
11
''(
28
1m
m
)
5’
(1
54
5m
m
)
1’11’’(600mm)
13’(3847mm)
15.7''(400mm)
11.8''(300mm) 11.8''(300mm)
11.8''(300mm)
4'11''(1513mm)
23'9 ''(7560mm)
19.7''(500mm) 11.8''(300mm)
11
''(
28
1m
m
)
5'
(1
54
5m
m
)
13'(3847mm) 15.7''(400mm)
11.8''(300mm) 11.8''(300mm)
Figure 5-51 Combination of fixed jib rear anchoring rods
30
°
10
°
For reference only.
Operators manual should be consulted and adhered to.