
履带起重机操作手册
安
全
准
则
Operator’s Manual for Crawler Crane
S
a
fe
ty
G
u
id
e
lin
e
s
3-42
ZCC1100H Crawler Crane
No.
Conditions
Examples
5
When the crane is working near the
high-voltage
power
line,
the
safe
clearance between any part of the crane
and overhead power line should comply
with regulations in table 3-9.
6
Only the crane without fault is allowed to
work.
Table 3-9 Beaufort scale chart
Wind force
Effects of the wind in the inland
Beaufort
scale
Description
Wind speed (m/s)
0
Calm
0-0.2
No wind, smoke rises straight up
1
Light air
0.4-1.4
Wind direction is shown only by observing
the trail of smoke, not by the wind sock
2
Light breeze
1.6-3
Wind can be felt on the face, the leaves
rustle, wind sock moves slightly
3
Gentle breeze
3.4-5.3
Leaves and thin twigs move. Wind extends
a small breeze flag.
4
Moderate
breeze
5.5-7.8
Swirls up dust and loose paper, moves
twigs and thin branches
5
Fresh breeze
8-10.6
Small deciduous trees begin to sway, foam
forms at sea.
6
Strong breeze
10.8-13.7
Thicker branches move; telephone lines
begin to whistle, umbrellas are difficult to
use
7
Stiff wind
13.9-17
Entire trees swaying; difficult to walk into
wind
8
Gale force wind
17.2-20.6
Breaks twigs off trees, walking becomes
difficult
9
Gale
20.8-24.5
Minor damage to property(chimney tops
and roofing tile are blown off)
10
Severe gale
24.7-28.3
Trees are uprooted, significant damage to
property
For reference only.
Operators manual should be consulted and adhered to.
Summary of Contents for ZCC1100
