Zoomlion ZCC1100, Operator'S Manual, Page: 257 / 291

Operator’s Manual for Crawler Crane
Operator’s Manual for Crawler Crane
Assembly
and
Dism
antling
5-51
Fixed jib can be assembled to required three lengths of 19'8" (6m), 39'4" (12m) and 59'1" (18m).
See the figure 5-47 and table 5-11.
Table 5-11 Assembly of fixed jib
Fixed jib length
Assembly sequence of
fixed jib sections
Fixed jib length
Assembly sequence of
fixed jib sections
19'8" (6m) G31+G32 59'1" (18m) G31+G33×2+G32
39'4" (12m) G31+G33+G32
DANGER
Main boom sections and main boom anchoring rods in this boom configuration are
bolted together in the same way as those in “main boom” configuration (The main boom
length in “Main boom with fixed jib” configuration varies from 101'9" (31m) to 180'5"
(55m). For the detailed information, refer to Section 5.4.1.
G33
G32
G31
G33
G31
G31
G32
G32
G33
Figure 5-47 Assembly of fixed jib
5.4.2.2 Components of fixed jib anchoring rods
The anchoring rods under “main boom with fixed jib” configuration comprises main boom
anchoring rods, fixed jib front anchoring rods and fixed jib rear anchoring rods.
For the components of main boom anchoring rods, see Section 5.4.1.2 “Combination of main
boom anchoring rods”. (The main boom length in “Main boom with fixed jib” configuration varies
from 101'9" (31m) to 180'5" (55m).)
The combination of fixed jib anchoring rods is described as follows.
19'8" (6m) 39'4" (12m) 59'1" (18m)
For reference only.
Operators manual should be consulted and adhered to.