Zhone IMACS 8000, User Manual

Page: 692 / 788

B-18 Reference Guide
Model No.
Running Head
Port is not active.
You cannot use the Hangup option on an HSU card port in the standby state.
Port is not configured for ASCII.
This port is not configured for ASCII operation.
Port is not configured for TCP/IP.
This port is not configured for TCP/IP operation.
Primary WAN is not operational.
You cannot switch from a redundant WAN port back to a primary WAN port if the primary
port is still not operational.
Profile has to be loaded first.
You cannot use the Dial command in the HSU Card Main Screen without first loading a call
profile.
Profile Id was not found.
Upon using the Load command in the HSU Card Main Screen, you requested a non-existing
call profile from the Interface card.
PROTOCOL must be MPLS to set MPLS OUTER LABEL on
An attempt to turn on the MPLS outer label without having the protocol set to MPLS is not
allowed.
PVC has user circuits active. No changes allowed.
You cannot deactivate a Frame Relay PVC with active user circuit(s).
PVC name must be entered.
You must enter a PVC name before executing this command.