Zhone IMACS 8000, User Manual

Page: 39 / 788

Reference Guide 2-1
System Installation Introduction
Chapter 2
System Installation
2.1 Introduction
This chapter provides instructions for unpacking and installing the 8000 chassis and plug-in
cards at the user site. It also includes other information you will need to properly install the
system and refers you to other chapters for additional card-level information.
The system can operate on either AC or DC power when equipped with the proper power
supply. Refer to the system specifications section in this manual regarding
electrical and
environmental requirements.
2.2 User-Set Switches and Jumpers
Several plug-in cards of the 8000 shelf contain on-board switches and/or jumpers. You must
prepare these cards before inserting them into the chassis.
2.3 Chassis Installation
2.3.1 Unpacking the Chassis and Cards
The 8000 chassis and cards are packed separately. When you receive your system, unpack the
boxes and check the contents for damage. If anything is damaged, contact the shipping carrier
to file a claim. The carrier representative will also tell you how to submit a claim, where to
send the unit, and give you any special instructions you may need.
Pack the damaged item in its original packing materials and send it by prepaid freight to the
address you received. If the original packing materials are unavailable, pack the unit in a
sturdy box and surround it with shock-absorbing material.
2.3.2 Pre-Installation Tips
2.3.2.1 Installation Checklist
Install your 8000 in the following sequence: