Zhone IMACS 8000, User Manual

Page: 396 / 788

12-14 Voice Cards
Model No.
Running Head
FXS Card User Screens and Settings FXS Card
Table 12-8. Test Screen Option Settings and Defaults
SIG MON
The Signaling Monitor feature works with the user card alarm system to detect excessive
signaling bit transitions. The system will generate alarms if the number of transitions of any
signaling bit in transmit or receive direction for an active port exceeds 255 in any four second
interval. The options are off and on, and they are toggled by pressing “g” (siGmon command)
in the Test Screen.
TEST
The Test parameter shows if the port is in test mode or not. Inactive ports and ports that are
assigned to inactive WANs will show a test status of n/a. The test status options for active
ports are off and on.
Tx ABCD
The Transmit ABCD setting allows the user to either monitor the status of the ABCD signaling
bits being transmitted towards the network or set a specific ABCD pattern for testing the
transmit side of the circuit. The options for this field are mon (monitor) or set. Choosing set
will bring up a four digit field for users to input the ABCD pattern they want to transmit. Any
four-digit combination of ones and zeros is acceptable for this setting.
Parameter User Options Default
SIG MON off on off
TEST off on off
Tx ABCD mon set mon
Rx ABCD mon set mon
T-R-CNTL mon set mon
TO USER PCM 300Hz 1kHz 3kHz quiet PCM
TO NTWK PCM 300Hz 1kHz 3kHz quiet PCM
Tx ABCD Status information only; not editable n/a
Rx ABCD Status information only; not editable n/a
T-R-CNTL Status information only; not editable n/a
T-R-STAT Status information only; not editable n/a
MODE Status information only; not editable n/a
TYPE Status information only; not editable n/a
STATUS Status information only; not editable n/a