Zhone IMACS 8000, User Manual

Page: 450 / 788

14-30 Data Cards
Model No.
Running Head
HSU Card User Screens and Settings HSU Card
Table 14-11. HSU Card Call Profile Screen Option Settings and Defaults
DCHAN
The D Channel number identifies which D Channel to route all outgoing calls that use this call
profile. The options are numbers 1-8.
CALLED #
The Called Number is the full telephone number of the device you are calling. Up to 25
numeric characters are allowed, although most calls use only ten digits. This parameter can be
overridden on a call-by-call basis when RS366 or V.25bis dialing is used with the Model 8213
HSU card.
CALLED # TYPE
The Called Number Type identifies the type of network used to reach the called phone number.
The options are natnl for domestic calls, intnl for international calls, and sbscr for VPN
(Virtual Private Network) calls. Your carrier can provide more detail about this option.
CALLED # PLAN
The Called Number Plan refers to the type of numbering plan used to reach the device you are
calling. The options are unkwn, isdn, phone and privt. Your carrier will provide more detail
about this option.
Parameter User Options Default
DCHAN 01-08 01
CALLED # telephone number (25 numeric characters) blank
CALLED # TYPE natnl intnl sbscr natnl
CALLED # PLAN unkwn isdn phone print unkwn
CHANNEL RATE 56u 56r 64u 64r 384u 384r 1536u 1536r
MRate 56u
RATE MULTIPLIER 1, 6, 24 2-24 (applies only to MRate) 1
IMUX CALL no yes no
SERVICE service from list set on ISDN card for this D
channel (first 7 characters) blank
CALLING # telephone number (25 numeric characters) blank
CALLING # TYPE natnl intnl sbscr natnl
CALLING # PLAN unkwn isdn phone print unkwn
PRESENT. INDCTR yes no yes
SCREEN. INDCTR up-ns up-ns
BCAST. PHONES no yes no