Zhone IMACS 8000, User Manual

Page: 488 / 788

16-4 Data Cards
Model No.
Running Head
LD-SRU Card User Screens and Settings LDSRU-10P Card
16.2.1.3 Installing the LD-SRU*10 Card
Install the SRU-LD*10 Card into any user card slot. These slots are U1 to U8 on the two-sided
chassis and front-loading chassis with power supplies on top, or P1 to P4 and W1 to W4 on
the front-loading chassis with power supplies on the side.
16.3 LD-SRU Card User Screens and Settings
You must configure the LD-SRU card for operation after installing it in the system chassis.
This is done from the LD-SRU Card Main Screen (Figure 16-3). To go to that screen, highlight
the desired card on the System Main Screen and press <Enter>. The LD-SRU Card Main
Screen has numerous columns of data for port configuration purposes. The port numbers on
the screen correspond to the card faceplate jacks from top to bottom (see Figure 16-3).
Figure 16-3.Typical SRU Card Main Screen
The highlighted bottom line of this screen shows numerous actions you can perform from this
screen. To perform an action, simply press the uppercase key indicated on this line. For
example, to save your option settings for this card, press “s”. Table 16-1 lists the actions you
can perform.