Zhone IMACS 8000, User Manual

Page: 603 / 788

Server Cards 22-7
MCC Card ACS-MCC Card User Screens and Settings
22.3.1.1 C-Port and Numbered Port Configuration (1.1 Version Only)
After establishing the card’s Ethernet parameter settings, configure the card’s ports. From the
ACS-MCC Card Main Screen, press “t” (porT command) to go to its ports. The ACS-MCC
card has three high-speed ports (C1, C2, and C3) and 128 other ports (1 to 128), in addition to
the Ethernet port.
Table 22-3 shows a typical C-Port Screen. After pressing “t” above, choose the C-ports (C1,
C2, and C3) and 128 other ports (1 to 128) to view this screen.
Figure 22-3.Typical C-Port Screen
The “less than” (<) and “greater than” (>) keys allow you to scroll through the other numbered
ports associated with this card. Figure 22-4 shows a Typical Numbered Port Screen. Table
22-2 lists the options and defaults for the card ports.
Table 22-3 lists the actions you can perform from either screen. To perform an action, press
the key indicated by the capitol letter on the bottom highlighted line of the screen.
Table 22-4 lists the Port Assignment Screen parameters and available setting. These are also
described in the following paragraphs.