Zelmer 877, User Manual

Page: 79 / 86

83
Preparation for operation, start-up and
operation
Wash the parts that have contact with the processed
●
food before initial use.
Place the motor near the power outlet, on a hard, clean
●
and dry surface.
Unwind a sufficient length of the cord. The remaining
●
cord can be stored in the housing. Put the remaining
cord in the housing through the opening in the back of
the housing.
Choose the appropriate equipment depending on the
●
selected type of operation.
OPERATING THE FOOD PROCESSOR (Fig. C)
1 Place the motor of the food processor on a hard, flat, and
dry surface.
2 Place the work bowl on the motor so that the triangu-
lar flange on the bottom of the container fits the tri-angular
protrusion of the motor.
OPERATING THE SLICING DISC (Fig. D)
1 Take off the blade casing
2 Put the white food processor blade into the container
3 Put the ingredients into the container.
4 Put the lid on. Place the lid’s hook in the container’s
flange opening and lower the lid.
5 Press the lid in the marked spot until you hear a click.
The lid’s protrusion should be placed in the opening of the
housing.
Plug in the appliance.
●
6 Turn the control head and set the appropriate operation
speed (see table at the end of this instruction manual).
OPERATING THE GRATERS (Fig. F)
1 Install the selected slicing disc on the disc stem. Put the
slicing disc on the tang, place the hooks under the edge of
the disc stem and push until the hooks snap shut.
2 Holding the middle tang, put the disc stem with the slicing
disc in the container.
3 Put the lid on. Place the lid’s hook in the container’s
flange opening and lower the lid.
4 Press the lid in the marked spot until you hear a click.
The lid’s protrusion should be placed in the opening of the
housing.
5 Plug in the appliance.
6 Turn the control head and set the appropriate operation
speed (see table at the end of this instruction manual).
Type 878 – OPERATING THE MIXING CONTAINER
(Fig. G)
1 Place the container on the motor so that the triangular
flange on the bottom of the container fits the triangular
protrusion of the motor.
2 Put the mixing blade (grey) into the container.
3 Put the ingredients into the container.
4 Put the lid. Place the lid’s hook in the opening situated on
the container’s handle and lower the lid.
5 Press the lid in the marked spot until you hear a click.
The lid’s protrusion should be placed in the opening of the
housing.
Plug in the appliance.
●
6 Turn the control head and set the appropriate operation
speed (see table at the end of this instruction manual).
During operation the food pusher should be placed in
the feed tube opening. It prevents food from spattering
and splashing.
Operation tips
The food processor grinds ingredients very fast. Turn on
●
the appliance only for a short period of time. This way the
ingredients will not be excessively grinded. Do not grind
large pieces using the food processor blade. Cut the
ingredients to approximately 3 cm cubes before putting
them into the container.
Do not allow the food processor to operate too long while
●
grinding cheese, butter, margarine. Such products may
heat and melt.
If the ingredients stick to the blade or the sides of the
●
container turn off the appliance, take off the lid and
remove the ingredients from the blade and the sides of
the container (using the spatula).
Grinding hard ingredients such as coffee beans, nutmeg
●
and ice cubes may affect the condition of the blade.
Slicing discs
In order to receive uniform round slices put wide
●
vegetables into the larger feed tube and the thin ones
into the smaller feed tube – separately into the smaller
feed tube and a couple of pieces at a time into the larger
one.
You will receive regular slices without torn edges when
●
the appliance is switched off while filling the feed tube.
To do that you can use the “PULSE” function.
Soft and juicy vegetables should be cut at lower speed,
●
hard vegetables at a faster one.
You can cut 0.8 – 1kg of fruit or vegetables at a time to
completely fill the container.
Shredding discs
You can fill the feed tube during operation.
●
While shredding you can use all available gears. Use
●
lower gears for soft fruits and vegetables and higher
gears for harder ones.
You can cut 0.8 – 1kg of fruit or vegetables at a time to
completely fill the container.
Pureeing disc
You can fill the feed tube during operation.
●
After pureeing approximately 0.5 kg of ingredients stop
●
the appliance and remove the pulp from the lid.