56
Description
G-30-1530-en
OPMI® VISU 210 on S8, S81, S88 Suspension Systems
Issue 1.0
Printed on 19. 04. 2004
Controls, displays, connections
1
Securing screw
2
X-Y coupling
3
Actuator button
–
recenters the X-Y coupling.
–
resets the focus to its initial position in the focusing range
–
sets the zoom system to a preselected magnification factor, if the
XYZ-RES function has been selected. This function is only availa-
ble with the S88 floor stand.
Note:
Press this button to start the recentering movement. To stop this
movement, press the button again.
You can also stop the recentering movement by briefly tipping on one
of the direction keys on the foot control panel.
4
Cable and light guide clip
5
Support arm with tilt device
6
Knob
for setting the tilt angle of the surgical microscope;
+ 180° in the direction of the surgeon,
- 180° in the opposite direction.
7
Arrows indicating the focusing range
If the dot is located between the two arrow tips, the focusing system
of the surgical microscope is in its starting position.
When using a fundus-imaging system
With the fundus imaging system swung out of the beam path, always po-
sition the microscope body in such a way that index dot (1) of the micro-
scope's focus is in the middle of triangle (2) of the marking (also see page
25).
1
2
MISU241