76
Description
G-30-1530-en
OPMI® VISU 210 on S8, S81, S88 Suspension Systems
Issue 1.0
Printed on 19. 04. 2004
S88 floor stand
Intended use
The floor stand is a carrier system for Zeiss surgical microscopes for al-
most all surgical disciplines. It is used to power and control the motorized
functions of a surgical microscope. The hallmarks of the floor stand are its
superb mobility and easy operation. Four steerable casters on the stand
base permit easy positioning in the OR. The motorized functions of the
surgical microscope can be controlled using a foot control panel or a hand
control panel.
Further useful functions include, for example:
–
magnetic brakes for almost effortless positioning,
–
fully automatic change of the halogen lamp,
–
brightness control via a foot control panel,
–
reset of X-Y coupling, focus and zoom,
–
user-defined basic settings for a maximum of nine users:
–
lamp brightness
–
speeds for focus, zoom and X-Y coupling
–
and configurable keys on the foot control panel for focus memory,
XY inversion, camera release, swing in/out of SDI, triggering an
AUX signal.
Warning!
When using xenon illumination, only operate the system with special
xenon lamps approved by Carl Zeiss. If any other than Carl Zeiss-ap-
proved xenon lamps are used, there is the risk of severe injury to the pa-
tient's eye.
MISU241
