![background image](http://html1.mh-extra.com/html/zeiss/iolmaster-700/iolmaster-700_service-manual_3344775035.webp)
3.3.8
Hard drives (HDD and/or SSD)
Precondition:
If possible, a database backup has been performed. See database backup.
The computer module and cover have been removed.
Procedure:
1)
Disconnect the SATA cable connector from
the appropriate drive.
2)
Remove the desired hard drive including
rubber mounting holders. This can be
achieved by lifting one side of the hard drive
– for example both left rubber mounts.
3)
Place the rubber mounting holders on the
new hard drive.
Reassembly:
1)
Reassemble in the reverse order.
2)
Perform software installation using service
drive image. See Re-imaging.
3)
Perform a system checkout in accordance
with the instrument checklist.
Fig. 40 – Hard drive replacement
3.3.9
PCIe Adapter PCB
Precondition:
The computer module and cover have been removed.
Procedure:
1)
Remove the two PCIe Adapter PCB mounting
screws (5mm hex socket driver).
2)
Remove the two screws (Torx 10) holding the
PCIe Adapter PCB horizontally. Pay attention
to not lose the washers!
Reassembly:
1)
Reassemble in the reverse order, observing
the following:
2)
When securing the mounting screws be sure
not to forget the small metal plate.
3)
Perform a system checkout in accordance
with the instrument checklist.
Fig. 41 – PCIe Adapter PCB screws
SATA
Rubber mounting
Mounting screws
screws
SM-30-4060
Confidential and Proprietary
Service Manual
3 - 19
Order No. 2075-325