Page – 6/75
AFMNA0AA – EPS-BLI HYG – User Manual
1.2 About the controller
1.2.1 Safety
Zapi provides this and other manuals to assist manufacturers in using the motor
controller in a proper, efficient and safe manner. Manufacturers must ensure that all
people responsible for the design and use of equipment employing the motor controller
have the proper professional skills and knowledge of equipment.
U
Before doing any operation, ensure that the battery is disconnected and when
the installation is completed start the machine with the driving wheels raised
from the ground to ensure that any installation error does not compromise
safety.
U
After the inverter turns-off, even with the key switch open, the internal
capacitors may remain charged for some time. For safe operation onto the
setup, it is recommended to disconnect the battery and to discharge the
DC-link capacitors.
1.2.2 OEM’s
responsibility
Zapi motor controllers are intended for controlling motors in electric vehicles.
These controllers are supplied to original equipment manufacturers (OEMs) for
incorporation into their vehicles and vehicle control systems.
Electric vehicles are subject to national and international standards of construction and
operation which must be observed. It is responsibility of the vehicle manufacturer to
identify the correct standards and to ensure that the vehicle meets these standards. As
a major electrical control component, the role of a Zapi motor controller should be
carefully considered and relevant safety precautions taken. It has several features
which can be configured to help the system integrator meeting vehicle safety
standards.
Zapi does not accept responsibility for incorrect application of its products.
1.2.3 Technical
support
For additional information on any topic covered in this document or application
assistance on other Zapi products, contact Zapi sales department.
