Zapi ACE0 2mC, User Manual

Page: 154 / 155

Page – 154/155 AF6ZP0CA – COMBIAC0 & ACE0 2uC – User Manual
Download procedure
After entering SAVE PARAMETER TO USB the Smart Console will check the
presence of the USB stick. If the stick is not connected yet, it will ask the operator
to connect one.
When the stick is present, the display will show the content, starting from the root
directory (/) of the filesystem. It should look like the following picture.
Notice that only directories are shown, not single files.
While exploring the content, the navigation buttons work in the following way:

Up/down keys are used to control scrolling.

Right key enters the highlighted directory: its content (directories only) will
be shown immediately.

Left key returns up to one level in the directory structure: it does not work
while being in /

Esc returns to HOME SCREEN

OK starts download.
When saving files, the console creates a subdirectory whose name has eight
digits:

First four digits are controller type

Fifth and sixth digits are the customer identification code

Seventh and eight digits are the code of the software installed inside the
controller.
An example of this code is the first directory name (VMNCNA11) shown in the
previous figure.
If parameters are downloaded multiple times from the same controller, or from
another controller whose eight digit code is the same, all parameter files are
saved in the same location.
If the directory does not exist, it is created when download is carried out for the
first time.
To download parameters, use following procedure:
1. Navigate the directory list and enter the directory where you want to save
the parameters
2. If this directory already contains the subdirectory with the correct 8 digits