York IDM030B21E Series, Service Manual

Page: 117 / 144

SM-16005-rev.2
5-29
EXTERNAL INPUT/OUTPUT AND FUNCTION SETTING
(52) Not Prepared (F0)
(53) Automatic OFF Timer Setting (F1)
This function is utilized to set the OFF timer function automatically when the unit is operated by the
wired controller. During the operation with the automatic OFF timer setting function, the cancellation of
the OFF timer and the changing of the setting period for OFF timer can not be performed.
However, the OFF timer function is canceled when the unit is stopped. When the unit is operated
again after stoppage, the setting period for OFF timer is set by the optional setting.
The setting condition and the setting period for OFF timer are shown below.
(54) Wired Controller Main-Sub Setting (F2)
This function is utilized when two wired controller are installed in one system.
Set one wired controller to main “00”, the other wired controller to sub “01”.
< Example for CIW01 >
Setting Condition Setting Period for OFF Timer
00 Invalid
01 1 hour
02 2 hours
23 23 hours
24 24 hours
0A 30 minutes
0B 90 minutes
0C 40 minutes
0D 45 minutes
0E 50 minutes
0F 55 minutes
NOTES:
1. This function is not available when the unit is controlled by the centralized
controller, the remote control connecting with Central Controllers.
2. The range of setting period for OFF timer differs depending on the wired controller
model.