YOKOGAWA DL1720E User Manual Download Page 37

Page: 37 / 186

5-2

IM 701730-17E

Command

Function

Page

:COMMunicate:OVERlap

Sets the commands that will operate as overlap commands or queries the
current setting.

5-24

:COMMunicate:REMote

Switches to remote/local mode.

5-24

:COMMunicate:STATus?

Queries the line status.

5-24

:COMMunicate:VERBose

Sets the response messages to full form or abbreviated form or queries the
current setting.

5-24

:COMMunicate:WAIT

Waits for a specified extended event.

5-24

:COMMunicate:WAIT?

Creates a response that is returned when the specified event occurs.

5-24

CURSor Group

:CURSor?

Queries all settings related to cursor measurements.

5-27

:CURSor:TY?

Queries all settings related to the cursor in the T-Y display.

5-27

:CURSor:TY:DEGRee?

Queries all settings related to angle cursors.

5-27

:CURSor:TY:DEGRee:DX?

Queries the angle difference,

∆

D, between angle cursors.

5-27

:CURSor:TY:DEGRee:DY?

Que30ries the angle difference,

∆

V, between angle cursors.

5-27

:CURSor:TY:DEGRee:JUMP

Moves the angle cursor to the zoomed waveform.

5-27

:CURSor:TY:DEGRee:POSition<x>

Sets the position of the angle cursor or queries the current setting.

5-27

:CURSor:TY:DEGRee:REFerence<x>

Sets the position of the zero point (Reference 1) or the end point (Reference 2)
that will be used as a reference in the angle cursor measurement or queries
the current setting.

5-27

:CURsor:TY:DEGRee:RVALue

Sets the reference angle of the angle cursor or queries the current setting.

5-27

:CURSor:TY:DEGRee:TRACe

Sets the waveform on which to use the angle cursor or queries the current
setting.

5-28

:CURSor:TY:DEGRee:X<x>?

Queries the angle at the angle cursor.

5-28

:CURSor:TY:DEGRee:Y<x>?

Queries the voltage value at the angle cursor.

5-28

:CURSor:TY:HORizontal?

Queries all settings related to horizontal cursors.

5-28

:CURSor:TY:HORizontal:DY?

Queries the Y-axis value between the horizontal cursors.

5-28

:CURSor:TY:HORizontal:POSition<x>

Sets the horizontal cursor position or queries the current setting.

5-28

:CURSor:TY:HORizontal:TRACe

Sets the waveform on which to use the horizontal cursor or queries the
current setting.

5-28

:CURSor:TY:HORizontal:Y<x>?

Queries the Y-axis value of the horizontal cursor.

5-28

:CURSor:TY:MARKer?

Queries all settings related to marker cursors.

5-28

:CURSor:TY:MARKer:DX<x>?

Queries the X-axis value between the marker cursors.

5-29

:CURSor:TY:MARKer:DY<x>?

Queries the physical value of the Y-axis difference between the marker
cursors.

5-29

:CURSor:TY:MARKer:M<x>?

Queries all settings related to the specified marker cursor.

5-29

:CURSor:TY:MARKer:M<x>:JUMP

Jumps the marker cursor onto the zoom waveform display frame.

5-29

:CURSor:TY:MARKer:M<x>:POSition<x>

Sets the X-axis position of the marker cursor or queries the current setting.

5-29

:CURSor:TY:MARKer:M<x>:TRACe

Sets the waveform on which to use the marker cursor or queries the current
setting.

5-29

:CURSor:TY:MARKer:X<x>?

Queries the X-axis position of the marker cursor.

5-29

:CURSor:TY:MARKer:Y<x>?

Queries the Y-axis position of the marker cursor.

5-29

:CURSor:TY:TYPE

Sets the cursor type or queries the current setting.

5-29

:CURSor:TY:VERTical?

Queries all settings related to vertical cursors.

5-29

:CURSor:TY:VERTical:DX?

Queries the X-axis value between vertical cursors.

5-30

:CURSor:TY:VERTical:DY?

Queries the Y-axis value between vertical cursors.

5-30

:CURSor:TY:VERTical:JUMP

Moves the vertical cursor to the zoomed waveform.

5-30

:CURSor:TY:VERTical:PERDt?

Queries the 1/

∆

T value between vertical cursors.

5-30

:CURSor:TY:VERTical:POSition<x>

Sets the vertical cursor position or queries the current setting.

5-30

:CURSor:TY:VERTical:TRACe

Sets the waveform on which to use the vertical cursor or queries the current
setting.

5-30

:CURSor:TY:VERTical:X<x>?

Queries the X-axis position of the vertical cursor.

5-30

:CURSor:TY:VERTical:Y<x>?

Queries the Y-axis position of the vertical cursor.

5-30

:CURSor:XY?

Queries all settings related to the cursors in the X-Y display.

5-30

:CURSor:XY:HORizontal?

Queries all settings related to the horizontal cursors in the X-Y display.

5-30

:CURSor:XY:HORizontal:DY?

Queries the Y-axis value of the horizontal cursor of the X-Y display.

5-30

:CURSor:XY:HORizontal:POSition<x>

Sets the horizontal cursor position of the X-Y display or queries the current
setting.

5-31

:CURSor:XY:HORizontal:TRACe

Sets the waveform on which to use the horizontal cursor in the X-Y display
or queries the current setting (DL1740E/DL1740EL only).

5-31

:CURSor:XY:HORizontal:Y?

Queries the Y-axis value of the horizontal cursor of the X-Y display.

5-31

:CURSor:XY:MARKer?

Queries all settings related to the marker cursors in the X-Y display.

5-31

:CURSor:XY:MARKer:POSition

Sets the X-axis position of the marker cursor in the X-Y display or queries
the current setting.

5-31

:CURSor:XY:MARKer:T?

Queries the time value of the marker cursor in the X-Y display.

5-31

:CURSor:XY:MARKer:TRACe

Sets the waveform on which to use the marker cursor in the X-Y display or
queries the current setting (DL1740E/DL1740EL only).

5-31

5.1 A List of Commands

Summary of Contents for DL1720E



























































































































































































Search results

Summary of Contents for DL1720E

Reviews:

Related manuals for DL1720E

Brands by name

Popular brands

YOKOGAWA DL1720E, User Manual

Search results

Summary of Contents for DL1720E

Reviews:

Related manuals for DL1720E

Brands by name

Popular brands