YOKOGAWA DL1720E User Manual Download Page 47

Page: 47 / 186

5-12

IM 701730-17E

Command

Function

Page

:SYSTem:LCD:AUTO:TIME

Sets the time for the LCD backlight auto-off function or queries the current
setting.

5-98

:SYSTem:LCD:BRIGhtness

Sets the brightness of the LCD monitor or queries the current setting.

5-98

:SYSTem:LCD:MODE

Turns the LCD backlight ON/OFF or queries the current setting.

5-98

:SYSTem:MLANGuage

Sets the menu language or queries the current setting.

5-98

:SYSTem:OCANcel(Offset Cancel)

Sets whether or not to reflect the offset voltage to the measured results or
the computed results or queries the current setting.

5-98

:SYSTem:OVERview

Displays the system information.

5-98

:SYSTem:SINFormation

Display setting parameters.

5-98

:SYSTem:TGATe

Sets the external trigger gate or queries the current setting.

5-98

:SYSTem:USBKEYBoard

Sets the USB keyboard type or queries the current setting.

5-98

TIMebase Group

:TIMebase?

Queries all settings related to the time base.

5-99

:TIMebase:SOURce

Sets the time base or queries the current setting.

5-99

:TIMebase:SRATe?

Queries the sample rate.

5-99

:TIMebase:TDIV

Sets the T/div value or queries the current setting.

5-99

TRIGger Group

:TRIGger?

Queries all settings related to the trigger.

5-104

:TRIGger:ABN?

Queries all settings related to the A -> B (n) trigger.

5-104

:TRIGger:ABN:COUNt

Sets the number of times condition B is to be met or queries the current
setting.

5-104

:TRIGger:ACTion?

Queries all settings related to the action-on-trigger.

5-104

:TRIGger:ACTion:ACQCount

Sets the number of times to perform the action for the action-on-trigger or
queries the current setting.

5-104

:TRIGger:ACTion:BUZZer

Sets whether or not to sound an alarm when the action is enabled or queries
the current setting.

5-104

:TRIGger:ACTion:HCOPy

Sets whether or not to make a hard copy of the screen image data when the
action is enabled or queries the current setting.

5-104

:TRIGger:ACTion:IMAGe

Sets whether or not to save the screen image to the external storage medium
when action is activated or queries the current setting.

5-104

:TRIGger:ACTion:MAIL?

Queries all the setting values for mail reports sent as an ACTion.

5-104

:TRIGger:ACTion:MAIL:COUNt

Sets/queries the limit for the number of reports that are sent as an ACTion.

5-105

:TRIGger:ACTion:MAIL:MODE

Sets/queries whether mail reports are sent as an ACTion.

5-105

:TRIGger:ACTion:SAVE

Sets whether or not to save the waveform data when the action is enabled or
queries the current setting.

5-105

:TRIGger:ACTion:STARt

Starts action-on-trigger.

5-105

:TRIGger:ACTion:STOP

Aborts action-on-trigger.

5-105

:TRIGger:ADB?

Queries all settings related to the A Delay B trigger.

5-105

:TRIGger:ADB:DELay

Sets the delay time of condition B or queries the current setting.

5-105

:TRIGger:ATRigger?

Queries all settings related to condition A.

5-105

:TRIGger:ATRigger:CHANnel<x>

Sets the condition of each channel for condition A or queries the current
setting.

5-105

:TRIGger:ATRigger:CONDition

Sets the conditions for condition A or queries the current setting.

5-105

:TRIGger:BTRigger?

Queries all settings related to condition B.

5-105

:TRIGger:BTRigger:CHANnel<x>

Sets the condition of each channel for condition B or queries the current
setting.

5-105

:TRIGger:BTRigger:CONDition

Sets the conditions for condition B or queries the current setting.

5-105

:TRIGger:DELay

Sets the delay or queries the current setting.

5-106

:TRIGger:HOLDoff?

Queries all settings related to the hold off.

5-106

:TRIGger:HOLDoff:TIME

Sets the hold off time or queries the current setting.

5-106

:TRIGger:MODE

Sets the trigger mode or queries the current setting.

5-106

:TRIGger:OR?

Queries all settings related to the OR trigger.

5-106

:TRIGger:OR:CHANnel<x>

Sets the edge of each channel or queries the current setting.

5-106

:TRIGger:OR:WINDow

Turns the window ON/OFF or queries the current setting.

5-106

:TRIGger:PATTern?

Queries all settings related to the pattern trigger.

5-106

:TRIGger:PATTern:CHANnel<x>

Sets the state of each channel or queries the current setting.

5-106

:TRIGger:PATTern:CLOCk?

Queries all settings related to the clock channel.

5-106

:TRIGger:PATTern:CLOCk:SLOPe

Sets the slope of the clock channel or queries the current setting.

5-106

:TRIGger:PATTern:CLOCk:SOURce

Sets the clock channel or queries the current setting.

5-106

:TRIGger:PATTern:CONDition

Sets the trigger condition or queries the current setting.

5-107

:TRIGger:POSition

Sets the trigger position or queries the current setting.

5-107

:TRIGger:SCOunt

Sets the number of times the trigger is activated when the trigger mode is
set to Single (N) or queries the current setting.

5-107

:TRIGger[:SIMPle]?

Queries all settings related to the simple trigger.

5-107

:TRIGger[:SIMPle]:COUPling

Sets the trigger coupling or queries the current setting.

5-107

5.1 A List of Commands

Summary of Contents for DL1720E



























































































































































































Search results

Summary of Contents for DL1720E

Reviews:

Related manuals for DL1720E

Brands by name

Popular brands

YOKOGAWA DL1720E, User Manual

Search results

Summary of Contents for DL1720E

Reviews:

Related manuals for DL1720E

Brands by name

Popular brands