YOKOGAWA DL1720E User Manual Download Page 49

Page: 49 / 186

5-14

IM 701730-17E

Command

Function

Page

:XY<x>:TRANge

Sets the range of the T-Y waveform to be used in the X-Y display or queries
the current setting.

5-115

:XY<x>:XAXis

Sets the X-axis mode (Single/Dual) or queries the current setting.

5-115

:XY<x>:XTRace

Sets the channel that is to be assigned to the X-axis or queries the current
setting.

5-115

:XY<x>:YTRace

Sets the channel that is to be assigned to the Y-axis or queries the current
setting.

5-115

ZOOM Group

:ZOOM?

Queries all settings related to the zooming of the waveform.

5-117

:ZOOM:ALLOcation?

Queries all settings related to the waveform being zoomed.

5-117

:ZOOM:ALLOcation:ALL

Selects all waveforms to be zoomed.

5-117

:ZOOM:ALLOcation:{CHANnel<x>|MATH<x>}

Sets the waveform to be zoomed or queries the current setting.

5-117

:ZOOM:FITMeasure

Changes the range of the automated measurement of waveform parameters
to the ends of the zoom box.

5-117

:ZOOM:FORMat

Sets the zoom waveform display format or queries the current setting.

5-117

:ZOOM:MLINkage

Turns the zoom rate link ON/OFF or queries the current setting.

5-117

:ZOOM:MAG<x>

Sets the zoom rate of the zoomed waveform or queries the current setting.

5-117

:ZOOM:MODE

Sets the zoom waveform display mode or queries the current setting.

5-117

:ZOOM:PLINkage

Turns the link ON/OFF when moving the zoom box or queries the current
setting.

5-117

:ZOOM:POSition<x>

Sets the zoom box position or queries the current setting.

5-117

Common Command Group

*CAL?

Executes calibration and queries the result.

5-118

*CLS

Clears the standard event register, extended event register, and error queue. 5-118

*ESE

Sets the standard event enable register or queries the current setting.

5-118

*ESR?

Queries the standard event register and clears the register.

5-119

*IDN?

Queries the instrument model.

5-119

*LRN?

Queries all current settings of the command group.

5-119

*OPC

Sets the OPC event after the completion of the specified overlap command.

5-119

*OPC?

Creates a response upon the completion of the specified overlap command.

5-120

*OPT?

Queries the installed options.

5-120

*PSC

Sets whether or not to clear the registers at power up or queries the current
setting.

5-120

*RST

Initializes the command group’s settings.

5-120

*SRE

Sets the service request enable register or queries the current setting.

5-120

*STB?

Queries the status byte register.

5-120

*TST?

Executes self test and queries the result.

5-120

*WAI

Holds the subsequent command until the completion of the specified overlap
operation.

5-120

5.1 A List of Commands

Summary of Contents for DL1720E



























































































































































































Search results

Summary of Contents for DL1720E

Reviews:

Related manuals for DL1720E

Brands by name

Popular brands

YOKOGAWA DL1720E, User Manual

Search results

Summary of Contents for DL1720E

Reviews:

Related manuals for DL1720E

Brands by name

Popular brands