Appendix
App-5
IM 701730-17E
App
12 List of Supported Common Commands
Refer to Section 5.35 “Common Command Group”.
13 Condition of Device when Calibration is Successfully Completed
Same as the one under which measurements are performed
14 Maximum Length of Block Data which can be Used for Definition of
*DDT
Trigger Macro
Not supported
15 Maximum Length of Macro Label Used in Definition of Macro, Maximum Length
of Block Data which can be Used for Definition of Macro, Processing when
Recursion is Used in Definition of Macro
Macro functions are not supported.
16 Response to
*IDN?
Refer to Section 5.35 “Common Command Group”.
17 Size of Storage Area for Protected User Data for
PUD
and
*PUD?
*PUD
and
*PUD?
are not supported.
18 Length of
*RDT
and
*RDT?
Resource Name
*RDT
and
*RDT?
are not supported.
19 Change in Status Due to
*RST
,
*LRN?
,
*RCL
and
*SAV
*RST
,
*LRN?
Refer to Section 5.35 “Common Command Group”.
*RCL
,
*SAV
These commands are not supported.
20 Execution Range of Self-Test Using the
*TST?
All the memory tests (for each internal memory) given in the Self Test menu displayed
using MISC can be executed.
21 Structure of Extended Return Status
Refer to Chapter 6.
22 To Find out whether Each Command is Performed in Parallel or Sequentially
Refer to Section 4.5 “Synchronization with the Controller” and to Chapter 5.
23 Description of Execution of Each Command
Refer to Chapter 5 of this manual and to the User’s Manual IM 701730-01E.
Appendix 3 Overview of IEEE 488.2-1992