5-71
IM 701730-17E
Commands
5
5.17 MEASure Group
:MEASure:{CHANnel<x>|MATH<x>}?
Function
Queries all specified parameter ON/OFF
settings.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}?
<x> of CHANnel <x>=1 to 4 (1 to 2 on the
DL1720E)
<x> of MATH <x>=1 or 2 (1 on the DL1720E)
Example
(An example for CH1 is given below.)
:MEASURE:CHANNEL1? -> :MEASURE:
CHANNEL1:AVERAGE:STATE 0;:MEASURE:
CHANNEL1:AVGFREQ:STATE 0;:MEASURE:
CHANNEL1:AVGPERIOD:STATE 0;:
MEASURE:CHANNEL1:BWIDTH1:STATE 0;:
MEASURE:CHANNEL1:BWIDTH2:STATE 0;:
MEASURE:CHANNEL1:DUTYCYCLE:
STATE 0;:MEASURE:CHANNEL1:FALL:
STATE 0;:MEASURE:CHANNEL1:
FREQUENCY:STATE 0;:MEASURE:
CHANNEL1:HIGH:STATE 0;:MEASURE:
CHANNEL1:LOW:STATE 0;:MEASURE:
CHANNEL1:MAXIMUM:STATE 0;:MEASURE:
CHANNEL1:MINIMUM:STATE 0;:MEASURE:
CHANNEL1:NOVERSHOOT:STATE 0;:
MEASURE:CHANNEL1:NWIDTH:STATE 0;:
MEASURE:CHANNEL1:PERIOD:STATE 0;:
MEASURE:CHANNEL1:PNUMBER:STATE 0;:
MEASURE:CHANNEL1:POVERSHOOT:
STATE 0;:MEASURE:CHANNEL1:PTOPEAK:
STATE 0;:MEASURE:CHANNEL1:PWIDTH:
STATE 0;:MEASURE:CHANNEL1:RISE:
STATE 0;:MEASURE:CHANNEL1:RMS:
STATE 0;:MEASURE:CHANNEL1:
SDEVIATION:STATE0;:MEASURE:CHANNEL1:
TY1INTEG:STATE 0;:MEASURE:CHANNEL1:
TY2INTEG:STATE 0;:MEASURE:CHANNEL1:
XY1INTEG:STATE 0;:MEASURE:CHANNEL1:
XY2INTEG:STATE 0;:MEASURE:CHANNEL1:
DELAY:STATE 0;MEASURE:SLOPE RISE;
COUNT 1;:MEASURE:CHANNEL1:DELAY:
REFERENCE:TRACE 1;SLOPE RISE;
COUNT 1;:MEASURE:CHANNEL1:
DPROXIMAL:MODE PERCENT;
PERCENT 10.0,50.0,90.0;
UNIT -150.000E+00,0.0E+00,
150.000E+00;:MEASURE:CHANNEL1:
METHOD AUTO 0
:MEASure:{CHANnel<x>|MATH<x>}:ALL
Function
Turns all the automated measurement
parameters of the waveform ON/OFF at once.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:
ALL {<Boolean>}
<x> of CHANnel <x>=1 to 4 (1 to 2 on the
DL1720E)
<x> of MATH <x>=1 or 2 (1 on the DL1720E)
Example
(The following example is for CH1.)
:MEASURE:CHANNEL1:ALL OFF
:MEASure:{CHANnel<x>|MATH<x>}:COPY
Function
Copies the ON/OFF state of all measurement
parameters of one waveform to all other
waveforms.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:COPY
<x> of CHANnel <x>=1 to 4 (1 to 2 on the
DL1720E)
<x> of MATH <x>=1 or 2 (1 on the DL1720E)
Example
:MEASURE:CHANNEL1:COPY
:MEASure:{CHANnel<x>|MATH<x>}:DELay?
Function
Queries all settings related to the delay
between waveform waveforms.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:
DELay?
<x> of CHANnel <x>=1 to 4 (1 to 2 on the
DL1720E)
<x> of MATH <x>=1 or 2 (1 on the DL1720E)
Example
:MEASURE:CHANNEL1:DELAY? ->
:MEASURE:CHANNEL1:DELAY:STATE 0;
MEASURE:SLOPE RISE;COUNT 1;:
MEASURE:CHANNEL1:DELAY:REFERENCE:
TRACE 1;SLOPE RISE;COUNT 1
:MEASure:{CHANnel<x>|MATH<x>}:DELay:
MEASure?
Function
Queries all settings related to the measured
waveform when measuring the delay between
waveforms.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:
DELay:MEASure?
<x> of CHANnel <x>=1 to 4 (1 to 2 on the
DL1720E)
<x> of MATH <x>=1 or 2 (1 on the DL1720E)
Example
:MEASURE:CHANNEL1:DELAY:MEASURE? ->
:MEASURE:CHANNEL1:MEASURE:
SLOPE RISE;COUNT 1
:MEASure:{CHANnel<x>|MATH<x>}:DELay:
MEASure:COUNt
Function
Sets the edge detection count of the measured
waveform in the delay measurement between
waveforms or queries the current setting.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:
DELay:MEASure:COUNt {<NRf>}
:MEASure:{CHANnel<x>|MATH<x>}:
DELay:MEASure:COUNt?
<x> of CHANnel <x>=1 to 4 (1 to 2 on the
DL1720E)
<x> of MATH <x>=1 or 2 (1 on the DL1720E)
Example
:MEASURE:CHANNEL1:DELAY:MEASURE:
COUNT 2
:MEASURE:CHANNEL1:DELAY:MEASURE:
COUNT? -> :MEASURE:CHANNEL1:DELAY:
MEASURE:COUNT 2
:MEASure:{CHANnel<x>|MATH<x>}:DELay:
MEASure:SLOPe
Function
Sets the slope of the measured waveform when
measuring the delay between waveforms or
queries the current setting.
Syntax
:MEASure:{CHANnel<x>|MATH<x>}:
DELay:MEASure:SLOPe {RISE|FALL}
:MEASure:{CHANnel<x>|MATH<x>}:
DELay:MEASure:SLOPe?
<x> of CHANnel <x>=1 to 4 (1 to 2 on the
DL1720E)
<x> of MATH <x>=1 or 2 (1 on the DL1720E)
Example
:MEASURE:CHANNEL1:DELAY:MEASURE:
SLOPE RISE
:MEASURE:CHANNEL1:DELAY:MEASURE:
SLOPE? -> :MEASURE:CHANNEL1:DELAY:
MEASURE:SLOPE RISE
