YASKAWA SGDV SERVOPACK, User Manual

Page: 379 / 398

www.dadehpardazan.ir 88594014-15
10 Appendix
10.2.2 Parameters
10-26
Pn50C
2 Input Signal Selection 3 0000 to FFFF

8888 After restart Setup

(cont’d)
Parameter
No.
Size Name
Setting
Range
Units
Factory
Setting
When
Enabled
Classification
Reference
Section
/SPD-D Signal Mapping
(Refer to
5.6 Internal Set Speed Control .)
Reference
Section
0
Active when CN1-40 input signal is ON (closed).
5.6.1
1 Active when CN1-41 input signal is ON (closed).
2 Active when CN1-42 input signal is ON (closed).
3
Active when CN1-43 input signal is ON (closed).
4
Active when CN1-44 input signal is ON (closed).
5 Active when CN1-45 input signal is ON (closed).
6 Active when CN1-46 input signal is ON (closed).
7
Reserved (Do not change.)
8
Not active (fixed).
9 Active when CN1-40 input signal is OFF (open).
A Active when CN1-41 input signal is OFF (open).
B
Active when CN1-42 input signal is OFF (open).
C
Active when CN1-43 input signal is OFF (open).
D Active when CN1-44 input signal is OFF (open).
E Active when CN1-45 input signal is OFF (open).
F
Active when CN1-46 input signal is OFF (open).
/SPD-A Signal Mapping
(Refer to
5.6 Internal Set Speed Control .)
Reference
Section
0 to F
Same as /SPD-D Signal Mapping.
5.6.1
/SPD-B Signal Mapping
(Refer to
5.6 Internal Set Speed Control .)
Reference
Section
0 to F
Same as /SPD-D Signal Mapping.
5.6.1
/C-SEL Signal Mapping (Control method change when ON (closed))
Reference
Section
0 to F
Same as /SPD-D Signal Mapping.
5.7.1
4th 3rd 2nd 1st
digit digit digit digit
n.
   