4 - 23
ENG
CAMSHAFTS
4. Measure:
●
Camshaft-to-cap clearance
Out of specification
→
Measure bearing
diameter (camshaft)
Camshaft-to-cap clearance:
0.020 ~ 0.054 mm
(0.0008 ~ 0.0021 in)
<Limit>: 0.08 mm (0.003 in)
Measurement steps:
●
Install the camshaft onto the cylinder
head.
●
Position a strip of Plastigauge
®
1
onto the
camshaft.
●
Install the clip, dowel pins and camshaft
caps.
T
R
.
.
Bolt (camshaft cap):
10 Nm (1.0 m • kg, 7.2 ft • lb)
NOTE:
●
Tighten the bolts (camshaft cap) in a criss-
cross pattern from innermost to outer
caps.
●
Do not turn the camshaft when measuring
clearance with the Plastigauge
®
.
●
Remove the camshaft caps and measure
the width of the Plastigauge
®
1
.
5. Measure:
●
Camshaft outside diameter
a
Out of specification
→
Replace the
camshaft.
Within specification
→
Replace cam-
shaft case and camshaft caps as a set.
Camshaft sprocket
1. Inspect:
●
Camshaft sprocket
1
Wear/damage
→
Replace the camshaft
assembly and timing chain as a set.
Camshaft outside diameter:
21.967 ~ 21.980 mm
(0.8648 ~ 0.8654 in)
1