–
+
ELEC
6 - 7
THROTTLE POSITION SENSOR SYSTEM
THROTTLE POSITION SENSOR SYSTEM
INSPECTION STEPS
If the throttle position sensor will not operate, use the following inspection steps.
*marked: Refer to “IGNITION SYSTEM” section.
NOTE:
●
Remove the following parts before inspection.
1) Seat
2) Fuel tank
●
Use the following special tools in this inspection.
Pocket tester:
YU-3112-C/90890-03112
Inductive tachometer:
YU-08036-B
Engine tachometer:
90890-03113
Check entire ignition
system for connection.
Repair or replace.
Check throttle position
sensor.
Throttle posi-
tion sensor coil
Replace.
*Check CDI magneto.
Charging coil
Replace.
Check CDI unit.
Throttle posi-
tion sensor
input voltage
Replace.
OK
OK
OK
No good
No good
No good
No good
