3 - 35
INSP
ADJ
FRONT FORK OIL SEAL AND DUST SEAL CLEANING/
FRONT FORK REBOUND DAMPING FORCE ADJUSTMENT
EC36D001
FRONT FORK OIL SEAL AND DUST SEAL
CLEANING
1. Remove:
●
Protector
●
Dust seal
1
NOTE:
Use a thin screw driver, and be careful not to
damage the inner fork tube and dust seal.
2. Clean:
●
Dust seal
a
●
Oil seal
b
NOTE:
●
Clean the dust seal and oil seal after every
run.
●
Apply the lithium soap base grease on the
inner tube.
EC36H002
FRONT FORK REBOUND DAMPING FORCE
ADJUSTMENT
1. Adjust:
●
Rebound damping force
By turning the adjuster
1
.
●
STANDARD POSITION:
This is the position which is back by the spe-
cific number of clicks from the fully turned-in
position.
* For EUROPE
Stiffer
a
→
Increase the rebound damp-
ing force. (Turn the adjuster
1
in.)
Softer
b
→
Decrease the rebound damp-
ing force. (Turn the adjuster
1
out.)
Extent of adjustment
Maximum
Minimum
Fully turned in
position
20 clicks out (from
maximum posi-
tion)
Standard position:
12 clicks out
* 13 clicks out
