manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

22

MU128

an Do

The MU128 — What It Is and What It Can Do

NOTE
When set to the TG300B mode, the MU128 may not be able to play TG300-specific
song data with complete accuracy. However, MIDI data designed for other computer
music tone generators is compatible with the MU128.

Play Modes and the Part Controls

Once the operating mode of the MU128 is set (Multi or Performance), there
are two main ways you can use the MU128: playing and editing. In the Play
modes, you play the Voices; in the various Edit modes, you change their
settings.

Within the Play modes are the Part controls. These let you make basic

settings for the Parts. The Single Part controls allow you to make indepen-
dent settings for each Part, while the All Part controls allow you to change
the overall settings of all Parts. (See pages 59 and 61 for more information.)
The MU128 has several different Edit modes, each with various menus and
operations:

Part Edit Mode

The Part Edit mode allows you to change certain settings for each individual
Part, such as those of the Filter, EG (Envelope Generator), and many other
settings. The internal Voices can be sounded during editing, allowing you to
hear the effects of your edits.

Utility Mode

The Utility mode lets you set functions related to the overall operation of the
MU128, such as Master Tune, display Contrast and reception of certain MIDI
messages that affect the entire instrument. Included also are miscellaneous
operations, such as sending bulk data to a data storage device, initializing of
the MU128 settings, and playing the special Demo song.

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

VBrick 9000 Series Quick Start Manual preview
9000 Series
Brand: VBrick Pages: 2
VBrick 9000 Series Getting Started Manual preview
9000 Series
Brand: VBrick Pages: 80
Rabbit EM1500 Product Manual preview
EM1500
Brand: Rabbit Pages: 120
U.S. Converters Bit Commander Manual preview
Bit Commander
Brand: U.S. Converters Pages: 19
Karma CVS 908 Instruction Manual preview
CVS 908
Brand: Karma Pages: 12
Schumacher Pi-120 Owner'S Manual preview
Pi-120
Brand: Schumacher Pages: 45
Tripp Lite PV100USB Owner'S Manual preview
PV100USB
Brand: Tripp Lite Pages: 4
Baum 22090 Installation And Operating Instructions Manual preview
22090
Brand: Baum Pages: 32
Kaco blueplanet 1502xi Instruction Manual preview
blueplanet 1502xi
Brand: Kaco Pages: 56
A-TS TECHNOLOGY FT50 Series User Manual preview
FT50 Series
Brand: A-TS TECHNOLOGY Pages: 87
Fischer Panda 6500 PMS Manual preview
6500 PMS
Brand: Fischer Panda Pages: 214
YASKAWA PVI 36TL Installation And Operation Manual preview
PVI 36TL
Brand: YASKAWA Pages: 120
C4i CV-53BI User Manual preview
CV-53BI
Brand: C4i Pages: 9
M-Audio MICRO DAC 24/192 User Manual preview
MICRO DAC 24/192
Brand: M-Audio Pages: 2
Hoymiles HM-600NT User Manual preview
HM-600NT
Brand: Hoymiles Pages: 29
GALCO EL110T User Manual preview
EL110T
Brand: GALCO Pages: 8
Quonset Microwave QM1003-0.5-18-2 User Manual preview
QM1003-0.5-18-2
Brand: Quonset Microwave Pages: 100
Accorroni HPE R32 40 User'S And Installer'S Manual preview
HPE R32 40
Brand: Accorroni Pages: 44

Brands by name

Popular brands

Load more brands