manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

MU128 Multi Mode

125

English

Multi Edit Mode

Assignable Controller 1 Amplitude
Control (AC1 AmpCtrl)

Range:

64 — +63

This determines the degree to which As-
signable Controller 1 (AC1) affects the
volume (Amplitude) for each Part. For
maximum effect, this should be set to one
of the extreme values, negative or posi-
tive. A setting of 00 results in no volume
control, even when AC1 is operated (or
control change data is received). Nega-
tive settings affect the volume negatively;
in other words, when the controller is at
the minimum position, control over the
volume is greatest. (The control number
used for AC1 is set in the Assignable
Controller 1 Control Change Number
parameter above.)

NOTE
For more information on using positive and
negative values, see the illustration and hint in
Assignable Controller 1 Filter Control (page
124).

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

Barco ImagePRO-4K Quick Start Manual preview
ImagePRO-4K
Brand: Barco Pages: 2
Fema I4 Series Manual preview
I4 Series
Brand: Fema Pages: 28
UNICOM FEP-5300TF-C Specifications preview
FEP-5300TF-C
Brand: UNICOM Pages: 1
GE HOME NERATOR SYSTEM 18000 WATT Installation And Start-Up Manual preview
HOME NERATOR SYSTEM 18000 WATT
Brand: GE Pages: 84
Vector Industrial Series VEC023 Owner'S Manual & Warranty Information preview
Industrial Series VEC023
Brand: Vector Pages: 8
Kohler PRO 12.3 EFI Owner'S Manual preview
PRO 12.3 EFI
Brand: Kohler Pages: 44
KATEK Steca coolcept 3 fleX Installation And Operating Instructions Manual preview
Steca coolcept 3 fleX
Brand: KATEK Pages: 40
S.M.S.L VMV D2 User Manual preview
VMV D2
Brand: S.M.S.L Pages: 31
PRO SIGNAL PSG3033 Quick Start Manual preview
PSG3033
Brand: PRO SIGNAL Pages: 2
MasterPower Delta UM Series Instruction Manual preview
Delta UM Series
Brand: MasterPower Pages: 29
Hagstrom KEUSB24 User Manual preview
KEUSB24
Brand: Hagstrom Pages: 24
GefenTV GTV-192KUSB-2-ADAUD User Manual preview
GTV-192KUSB-2-ADAUD
Brand: GefenTV Pages: 36
Radial Engineering 9000-0033-6922 User Manual preview
9000-0033-6922
Brand: Radial Engineering Pages: 11
Weco Discovery 172T Instruction Manual preview
Discovery 172T
Brand: Weco Pages: 56
Fronius DC Box 60/12 Operating Instructions Manual preview
DC Box 60/12
Brand: Fronius Pages: 135
austriamicrosystems AS5130 Operation Manual preview
AS5130
Brand: austriamicrosystems Pages: 8
Tektronix TSG 601 Instructions preview
TSG 601
Brand: Tektronix Pages: 2
Kramer VP-426 User Manual preview
VP-426
Brand: Kramer Pages: 20

Brands by name

Popular brands

Load more brands