manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

132

MU128 Performance Mode

Performance Bank

Settings:

Pre (Preset), Int (Internal)

This determines the bank of Performance
programs: Preset or Internal. Preset Perfor-
mances are those that have been created and
loaded at the factory; the Internal bank is
reserved for user-created Performances.

NOTE
When changing Performance banks, there may
be a slight delay before the sound changes.

Performance Number

Range:

001 — 100

This determines the Performance number.

NOTE
When changing Performance numbers, there
may be a slight delay before the sound changes.

Performance Part Control

All Part

For basic information on using the All Part controls in the Performance mode, see page
70.

Performance Volume (Pfm Vol)

Range:

000 — 127

This determines the overall Volume of the
Performance.

NOTE
When the Variation effect is used as a System
effect (page 153), you may have to adjust the
Variation Return parameter (page 133) as well
as the Performance Volume parameter, to
achieve the desired balance.

Performance Pan (Pfm Pan)

Range:

L63 — C — R63

This determines the overall Pan position
of the Performance (except for the effect
sound).

NOTE
The overall Pan position offsets the individual
Pan settings of each Part (page 135).  A set-
ting of “C” (center) maintains the individual
Pan settings of each Part.

Performance Part Control

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

Zeversolar Zeverlution 3680 Quick Installation Manual preview
Zeverlution 3680
Brand: Zeversolar Pages: 2
Nedap PowerRouter PR50S Installation And Operating Manual preview
PowerRouter PR50S
Brand: Nedap Pages: 64
ZCS AZZUPRO 5-20-ZSS Quick Manual preview
AZZUPRO 5-20-ZSS
Brand: ZCS Pages: 44
HEIDENHAIN AK ERP 10 Series Mounting Instructions preview
AK ERP 10 Series
Brand: HEIDENHAIN Pages: 20
V-TAC VT-6608303 Instruction Manual preview
VT-6608303
Brand: V-TAC Pages: 54
Cable-Tronix CT-DTA-TOSLINK Installation Manual preview
CT-DTA-TOSLINK
Brand: Cable-Tronix Pages: 4
Ross GearLite FDB-9649-LC User Manual preview
GearLite FDB-9649-LC
Brand: Ross Pages: 22
SunSynk Power Bank 1000 User Manual preview
Power Bank 1000
Brand: SunSynk Pages: 11
Pixelfly PF-IPHM User Manual preview
PF-IPHM
Brand: Pixelfly Pages: 12
Brunner 0826089N Quick Start Manual preview
0826089N
Brand: Brunner Pages: 8
Growcol GHyper 3000 User Manual preview
GHyper 3000
Brand: Growcol Pages: 52
ADF Web HD67E17-A1 User Manual preview
HD67E17-A1
Brand: ADF Web Pages: 31
Epever IP1000-11 User Manual preview
IP1000-11
Brand: Epever Pages: 24
Qcells Q.HOME CORE H Series User Manual preview
Q.HOME CORE H Series
Brand: Qcells Pages: 28
StarTech.com ET91000MMSM Instruction Manual preview
ET91000MMSM
Brand: StarTech.com Pages: 2
Samlex Europe PSI 1000-12/24 Manual preview
PSI 1000-12/24
Brand: Samlex Europe Pages: 52
HRT VHD-HDMI User Manual preview
VHD-HDMI
Brand: HRT Pages: 4
Fronius Symo GEN24 10.0 Operating Instructions Manual preview
Symo GEN24 10.0
Brand: Fronius Pages: 120

Brands by name

Popular brands

Load more brands