manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

180

MU128 Plug-in System

4 

 Insert the board along the guide rails about two-thirds of the way
inside the MU128, with the connector side face down and toward
you (as shown below).  Make sure to insert it slowly and gently,
keeping the edges of the board inside the proper guide rails, as
shown in the illustration.  With the board in place, plug in one of
the three cable connectors to the connector on the XG Plug-in
board.  Any one of the cable connectors can be used.
The logical board assignment in the MU128 (PLG-1 - 3) is set
automatically to the following order: 1) PLG100-VL, 2) PLG100-
DX, 3) PLG100-VH.

Carefully plug in the cable connector to the XG Plug-in connector
as shown below, matching the two notches on the cable connector
with the sockets on the board.  Firmly press the connectors together
until they lock.

About Plug-in System

MIDI

THRU

OUT

IN-A

IN-B

HOST SELECT

MIDI

Mac

PC-2

PC-1

TO HOST

DC IN

OUTPUT

INPUT

L

R

SER NO.

Guide rail

Plug-in board

Insert the board along
one of these rails.

XG Plug-in board

Cable connector

XG Plug-in connector

Notch

Press the connectors together until
the two notches lock into the sockets.

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

Unipower SLI 15 User Manual preview
SLI 15
Brand: Unipower Pages: 19
YASKAWA D1000 Series Instruction Manual preview
D1000 Series
Brand: YASKAWA Pages: 251
Yamaha ACU16-C Manual preview
ACU16-C
Brand: Yamaha Pages: 32
Pleora Technologies iPort PT1000-CL Hardware Manual preview
iPort PT1000-CL
Brand: Pleora Technologies Pages: 29
StarTech.com ET91000LCOAM Manual preview
ET91000LCOAM
Brand: StarTech.com Pages: 24
Lenz DIGITAL plus LC100 Manual preview
DIGITAL plus LC100
Brand: Lenz Pages: 8
Kramer Tools 482xl Quick Start Manual preview
Tools 482xl
Brand: Kramer Pages: 2
NANO MACHINES DX-DVDm User Manual preview
DX-DVDm
Brand: NANO MACHINES Pages: 5
Beckhoff EP9521-0020 Documentation preview
EP9521-0020
Brand: Beckhoff Pages: 40
Wentronic Goobay 67825 User Manual preview
Goobay 67825
Brand: Wentronic Pages: 4
SystemBase Multi-1/USB Ver4.0 User Manual preview
Multi-1/USB Ver4.0
Brand: SystemBase Pages: 63
NetUP HDMI Encoder 8x User Manual preview
HDMI Encoder 8x
Brand: NetUP Pages: 44
Teracue ENC-500 User Manual preview
ENC-500
Brand: Teracue Pages: 38
Perle S-10GRT-SFP Installation Manual preview
S-10GRT-SFP
Brand: Perle Pages: 23
Actox ABE12KX User Manual preview
ABE12KX
Brand: Actox Pages: 36
BluStream HEX70HDU-KIT User Manual preview
HEX70HDU-KIT
Brand: BluStream Pages: 21
National Instruments SCXI -1124 User Manual preview
SCXI -1124
Brand: National Instruments Pages: 54
Renishaw RGH22 Installation Manual preview
RGH22
Brand: Renishaw Pages: 15

Brands by name

Popular brands

Load more brands