manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

MU128 Utility Mode

157

English

Master Tune (M.Tune)

Range:

–102.4 — +102.3 cents
(approx. +/– 1 semitone)

This determines the overall fine tuning of
the MU128’s Voices. It does not affect the
pitch of the individual drum/percussion
sounds of the drum kits. Master Tune is es-
pecially useful for adjusting the pitch of the
MU128 when playing with other instru-
ments. The actual pitch of each Voice de-
pends also on the other pitch related param-
eters: Note Shift, Transpose (in Play mode)
and Detune (in Edit mode).

NOTE
At around 440 Hz, 1 Hz is approximately
equal to 4 cents.

Device Number (DevNo.)

Settings:

1 — 16, all

This determines the Device Number for
the MU128, a kind of MIDI “identifica-
tion” number to distinguish between mul-
tiple units. For example, if you are using
more than one MU128, set a different De-
vice Number for each. This setting only
applies to the data dump features. (page
162.) If you have only one MU128, set
this to “all.”

System Functions (SYSTEM)

The System functions provide various controls of the overall operation of
the MU128, such as Master Tune, Mute and A/D Part Lock, some MIDI
receive filters and a display Contrast control.

Performance Receive Channel
(PFMRcvCh)

Range:

01 — 16

This determines the MIDI receive chan-
nel for the Performance mode.  Set this
to match the MIDI transmit channel on
the connected MIDI device.  Also, make
sure that the MIDI device is connected to
the MIDI IN-A terminal of the MU128
and that the Performance mode is en-
abled.

MIDI IN-A Terminal

Settings:

 rear, front

This determines which of the MIDI IN-A
terminals is used to receive MIDI data.
When set to “rear,” the rear panel MIDI
IN-A terminal is active; when set to
“front,” the front panel MIDI IN A termi-
nal is active.  Both terminals cannot be
used simultaneously.  This is set to “rear”
as the factory default.

System Functions (SYSTEM)

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

Lantronix 4120 Series User Manual preview
4120 Series
Brand: Lantronix Pages: 142
Datalogic AMT58 Series Mounting Instructions preview
AMT58 Series
Brand: Datalogic Pages: 2
Datalogic ENC58-H15 Series Mounting Instructions preview
ENC58-H15 Series
Brand: Datalogic Pages: 2
YASKAWA Varispeed-606PC3 Instruction Manual preview
Varispeed-606PC3
Brand: YASKAWA Pages: 157
YASKAWA Varispeed CIMR-G7A Instruction Manual preview
Varispeed CIMR-G7A
Brand: YASKAWA Pages: 459
Z-Band Z-IP Encode 004 User Manual And Installation Manual preview
Z-IP Encode 004
Brand: Z-Band Pages: 22
TAMS FD-M Manual preview
FD-M
Brand: TAMS Pages: 30
StarTech.com ET91000SM10 Manual preview
ET91000SM10
Brand: StarTech.com Pages: 12
B&B Electronics ELinx EIR-G-SFP-T Quick Start Manual preview
ELinx EIR-G-SFP-T
Brand: B&B Electronics Pages: 2
Prism Sound ADA-8 Module Reference preview
ADA-8
Brand: Prism Sound Pages: 63
TRUELOOK Solar Skid Assembly Manual preview
Solar Skid
Brand: TRUELOOK Pages: 12
Black Box SCSI Differential Converter Specifications preview
SCSI Differential Converter
Brand: Black Box Pages: 3
Emheater EM-GS Series User Manual preview
EM-GS Series
Brand: Emheater Pages: 30
EA EA-MEC-PB 150-12B Instruction Manual preview
EA-MEC-PB 150-12B
Brand: EA Pages: 4
Westerbeke WMD6 Specification preview
WMD6
Brand: Westerbeke Pages: 2
Mitsubishi -NAFR-F720-00167-NA Instruction Manual preview
-NAFR-F720-00167-NA
Brand: Mitsubishi Pages: 413
TaKo Electronics EBi Direct Interpolation DAC User Manual preview
EBi Direct Interpolation DAC
Brand: TaKo Electronics Pages: 7
Channel Vision B-204 Instructions preview
B-204
Brand: Channel Vision Pages: 2

Brands by name

Popular brands

Load more brands