manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

MU128 Performance Mode

139

English

Assignable Controller Parameters

Assignable Controller 1 Control
Change Number (AC1 CC No.)

Same as the corresponding parameter in
the Multi Edit mode (page 124), with the
exception that AC1 in the Performance
mode can also control LFO filter modu-
lation (see Assignable Controller 1 LFO
Filter Modulation Depth below).

Assignable Controller 1 Filter Control
(AC1 FilCtrl)

Same as the corresponding parameter in
the Multi Edit mode. (page 124.)

Assignable Controller 1 Amplitude
Control (AC1 AmpCtrl)

Same as the corresponding parameter in
the Multi Edit mode. (page 125.)

Assignable Controller 1 LFO Filter
Modulation Depth (AC1LFOFMod)

Range:

000 — 127

This determines the degree to which As-
signable Controller 1 (AC1) affects the
LFO modulation of the Filter. This cre-
ates a regular and continuous “wah-wah”
or filter sweep effect. The higher the
value, the greater the LFO filter modula-
tion. (The control number used for AC1
is set in the Assignable Controller 1 Con-
trol Change Number parameter above.)

Modulation Wheel — LFO Filter
Modulation Depth (MW LFOFMod)

Range:

000 — 127

This determines how widely the Filter
(page 111) is modulated by the LFO (low
frequency oscillator). This is generally
controlled from a modulation wheel on a
MIDI keyboard, and depending on the
Voice used, it creates a “swoosh” or
“wah-wah” filter sweep effect. Higher
values result in deeper filter modulation,
creating a more pronounced filter sweep
effect.

Pitch Bend

Pitch Bend Control (PitBndCtrl)

Same as the corresponding parameter in
the Multi Edit mode. (page 123.)

A/D Part

A/D Part

Settings:

off, on

This determines whether A/D Parts are
enabled for the Performance or not. When
set to “on,” Parts 3 and 4 are automati-
cally set as A/D Parts (A/D1 and A/D2).

HINT
You can use the MU128 strictly as an effect
processor for the A/D input (for example, your
guitar or microphone) by Soloing the appro-
priate A/D Part (A/D1 or A/D2).

Performance Edit Mode

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

TAD DA1000 Owner'S Manual preview
DA1000
Brand: TAD Pages: 128
Datel 20A Specification Sheet preview
20A
Brand: Datel Pages: 22
ZIEHL-ABEGG ZETADYN 3C Technical Information preview
ZETADYN 3C
Brand: ZIEHL-ABEGG Pages: 22
Ikelite 4401.3 Manaul preview
4401.3
Brand: Ikelite Pages: 2
Goobay 60267 User Manual preview
60267
Brand: Goobay Pages: 24
CYP CPLUS-V2PEL Operation Manual preview
CPLUS-V2PEL
Brand: CYP Pages: 38
Vicon VI-DSP-2 Setup And Installation Manual preview
VI-DSP-2
Brand: Vicon Pages: 18
Oilon ECO Inverter+ 25 Installation And Commissioning Manual preview
ECO Inverter+ 25
Brand: Oilon Pages: 58
Lindy 38363 User Manual preview
38363
Brand: Lindy Pages: 14
National Communications BMS-1 User Manual preview
BMS-1
Brand: National Communications Pages: 20
Teleste EASI ATM IND2x2 Series User Manual preview
EASI ATM IND2x2 Series
Brand: Teleste Pages: 28
Cobra CPI 1550 Operating Instructions Manual preview
CPI 1550
Brand: Cobra Pages: 14
Actox ABCN50X User Manual preview
ABCN50X
Brand: Actox Pages: 36
Fronius DC Box 60/12 Operating Instructions Manual preview
DC Box 60/12
Brand: Fronius Pages: 135
Interlogix IFS MC250-4T Series User Manual preview
IFS MC250-4T Series
Brand: Interlogix Pages: 23
Daihen Welbee WB-A350P Owner'S Manual preview
Welbee WB-A350P
Brand: Daihen Pages: 150
Digitus DA-70464 Manual preview
DA-70464
Brand: Digitus Pages: 4
HEIDENHAIN LIP 481 U Mounting Instructions preview
LIP 481 U
Brand: HEIDENHAIN Pages: 26

Brands by name

Popular brands

Load more brands