manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

MU128 Multi Mode

121

English

Mono/Poly Mode

Settings:

mono, poly

This determines whether the Part’s Voice
is played monophonically (only one note
at a time) or polyphonically (up to 128
notes at a time). This parameter is not
available when the Part Mode is set to
Drum.

Portamento Parameters

Portamento is a function that creates a
smooth pitch glide from one note to an-
other.

Portamento Switch (PortametSw)

Settings:

off, on

This determines whether Portamento is
on or off for the Part. (This parameter is
not available for Drum Parts.)

Portamento Time (PortametTm)

Range:

000 — 127

This determines the time of the
Portamento effect, or how long it takes
to glide the pitch from one note to the
next. Higher values result in a longer pitch
glide time. (This parameter is not avail-
able for Drum Parts.)

Multi Edit Mode

Height of bars indicates selected Mono/Poly
Mode setting for each Part. (A single bar
indicates “mono” setting, while full height
indicates “poly”.)

Height of bars indicates selected Portamento
Switch setting for each Part. (A single bar
indicates “off” setting, while full height
indicates “on.”)

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

Karma CVS 908 Instruction Manual preview
CVS 908
Brand: Karma Pages: 12
Lindy 38363 User Manual preview
38363
Brand: Lindy Pages: 14
Samlexpower samlexsolar SPB-EXPLORE200 Installation Manual preview
samlexsolar SPB-EXPLORE200
Brand: Samlexpower Pages: 2
l-com DVI to VGA Conversion Box User Manual preview
DVI to VGA Conversion Box
Brand: l-com Pages: 7
B&K RAV20 User Manual preview
RAV20
Brand: B&K Pages: 2
M-system 18JM Instruction Manual preview
18JM
Brand: M-system Pages: 5
Monoprice Blackbird 9140A-PCA User Manual preview
Blackbird 9140A-PCA
Brand: Monoprice Pages: 11
SIIG CE-H26E11-S1 User Manual preview
CE-H26E11-S1
Brand: SIIG Pages: 32
ZIPPER MASCHINEN ZI-STE1800IV User Manual preview
ZI-STE1800IV
Brand: ZIPPER MASCHINEN Pages: 52
Vicruns VD520 Series User Manual preview
VD520 Series
Brand: Vicruns Pages: 212
Inside Out Networks Digi Edgeport/1i Installation Manual preview
Digi Edgeport/1i
Brand: Inside Out Networks Pages: 22
Hall Research Technologies HRT-EMX-HD-AUD User Manual preview
HRT-EMX-HD-AUD
Brand: Hall Research Technologies Pages: 5
Shinybow USA SB-3682 Instruction Manual preview
SB-3682
Brand: Shinybow USA Pages: 2
Extron electronics VSC 200 User Manual preview
VSC 200
Brand: Extron electronics Pages: 54
Lindy 43289 User Manual preview
43289
Brand: Lindy Pages: 2
Wavtech Link6 Owner'S Manual preview
Link6
Brand: Wavtech Pages: 12
Radyne ComStream TIERNAN SE4000 Installation And Operation Manual preview
TIERNAN SE4000
Brand: Radyne ComStream Pages: 161
Agilent Technologies E5053-90020 User Manual preview
E5053-90020
Brand: Agilent Technologies Pages: 54

Brands by name

Popular brands

Load more brands