manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

58

MU128 Guided Tour

Editing in the Multi Mode

This section takes you step-by-step through an example editing session in
the Multi mode. The operations and techniques you learn here enable you to
perform any editing operation in the Multi mode.

There are two separate sections of the Multi mode that are devoted to

editing: the Single/All Part controls, and the Edit menus.

In this section, you’ll learn how to:

©

Select a Part for editing.

©

Use the Single Part controls — to change the MIDI channel of a Part, and
change its Volume and Pan settings.

©

Use the Edit menu parameters — to change the filter and EG (Envelope
Generator) settings of a Part.

©

Use the Drum Setup controls — to change the Part settings for a drum kit.

Hints
• Editing Parts, not Voices

It is important to remember that in editing you are not changing the Voice itself,
but rather the Part the Voice is assigned to. This means that when you change the
Voice of the Part, the edited settings apply to the new voice, whether they’re
appropriate or not.

• Saving your edits

Keep in mind that any edits you make in the Multi mode are automatically saved
as the power on defaults. In other words, the next time you turn on the power, the
previous condition of all Parts is automatically recalled. If you want to save one
“set” of edits (for example, for use with a specific song) before creating another
set, you must first save the current setup to a sequencer or MIDI data filer. (For
details, see page 162.)

Editing in the Multi Mode

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

ICP DAS USA tM-752N Series Quick Start Manual preview
tM-752N Series
Brand: ICP DAS USA Pages: 7
Kaco blueplanet 3.0 TL3 M2 WM OD IIG0 Operating Instructions Manual preview
blueplanet 3.0 TL3 M2 WM OD IIG0
Brand: Kaco Pages: 262
Humandata LNX Series Installation Manual preview
LNX Series
Brand: Humandata Pages: 10
Prism Sound ADA-8 Module Reference preview
ADA-8
Brand: Prism Sound Pages: 63
Elenco Electronics GF-8056 User Manual preview
GF-8056
Brand: Elenco Electronics Pages: 12
TBB Energier Pro CF2060L User Manual preview
Energier Pro CF2060L
Brand: TBB Pages: 60
StarTech.com ET91000SM20 User Manual preview
ET91000SM20
Brand: StarTech.com Pages: 12
Kramer FC-340S User Manual preview
FC-340S
Brand: Kramer Pages: 25
Sonos LOUDSPEAKER SP100 Setup Manual preview
LOUDSPEAKER SP100
Brand: Sonos Pages: 46
leadsun AE3 Series User Manual preview
AE3 Series
Brand: leadsun Pages: 8
Vitus Audio MP-D201 Owner'S Manual preview
MP-D201
Brand: Vitus Audio Pages: 80
Saftronics FP5 Series User Manual preview
FP5 Series
Brand: Saftronics Pages: 101
Moso SF1.6/2.2/3KTL-S User Manual preview
SF1.6/2.2/3KTL-S
Brand: Moso Pages: 38
SMA SUNNY BOY 3600TL User Manual preview
SUNNY BOY 3600TL
Brand: SMA Pages: 2
Baumer HUBNER BERLIN HOG 75 K Mounting And Operating Instructions preview
HUBNER BERLIN HOG 75 K
Brand: Baumer Pages: 32
SMAR FP302 Owner'S Operation And Maintenance Manual preview
FP302
Brand: SMAR Pages: 66
DCCconcepts Cobalt Alpha Series Manual preview
Cobalt Alpha Series
Brand: DCCconcepts Pages: 25
ATEN VC1280 User Manual preview
VC1280
Brand: ATEN Pages: 33

Brands by name

Popular brands

Load more brands