manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

122

MU128 Multi Mode

Note Limit Parameters

The Note Limit Low and High parameters
allow you to set the range of notes for a
Part’s Voice. Notes outside the range will
not be played.

HINT
Note Limit can be used to set up keyboard
splits. Set two Parts to the same MIDI chan-
nel (see page 119), but give them Note Limit
settings so that one Part is played from the
left side of the keyboard and the other is
played from the right.

Note Limit Low (NoteLimitL)

Range:

C-2 — G8

This determines the lowest responding
note for the Part. Notes below this value
will not be played.

Note Limit High (NoteLimitH)

Range:

C-2 — G8

This determines the highest responding
note for the Part. Notes above this value
will not be played.

Dry Level

Dry Level

Range:

000 — 127

This determines the level of the unpro-
cessed sound of the Voice (sound with no
effect processing). This parameter is only
available when the Variation Connec-
tion parameter is set to SYS.  (See page
150.)

Velocity Sensitivity Parameters

Velocity Sensitivity Depth (VelSensDpt)

Range:

000 — 127

This determines the degree to which ve-
locity affects the Part’s Voice. Higher val-
ues make the Voice more sensitive to
changes in velocity.

Multi Edit Mode

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

Xantrex RS2000 Installation Manual preview
RS2000
Brand: Xantrex Pages: 76
XINDAK DAC Instructions Manual preview
DAC
Brand: XINDAK Pages: 9
Yamaha TX-81Z Product Manual preview
TX-81Z
Brand: Yamaha Pages: 88
Yamaha UX96 Eigentümer-Handbuch preview
UX96
Brand: Yamaha Pages: 30
Yamaha UX96 Mode D'Emploi preview
UX96
Brand: Yamaha Pages: 30
Yamaha EF4500iSE - Inverter Generator Installation And Operation Manual preview
EF4500iSE - Inverter Generator
Brand: Yamaha Pages: 10
Planet GT-922 Manual preview
GT-922
Brand: Planet Pages: 7
LevelOne Infinity IEC-2001 Quick Installation Manual preview
Infinity IEC-2001
Brand: LevelOne Pages: 2
Pyle Power Inverter PNVS4 Owner'S Manual preview
Power Inverter PNVS4
Brand: Pyle Pages: 1
Green Power 1300G Installation Instructions & User Manual preview
1300G
Brand: Green Power Pages: 21
Avermedia AVerKey550 User Manual preview
AVerKey550
Brand: Avermedia Pages: 38
N-Tron 102PC-SE User Manual & Installation Manual preview
102PC-SE
Brand: N-Tron Pages: 40
XPower Pocket Inverter 100 Owner'S Manual preview
Pocket Inverter 100
Brand: XPower Pages: 38
POWER ON BOARD VEC550POB Owner'S Manual & Warranty preview
VEC550POB
Brand: POWER ON BOARD Pages: 13
RKC INSTRUMENT COM-K IMR01Z01-E9 Instruction Manual preview
COM-K IMR01Z01-E9
Brand: RKC INSTRUMENT Pages: 2
Ericsson 1553-FGC 101 1010 Uen A Handbook preview
1553-FGC 101 1010 Uen A
Brand: Ericsson Pages: 153
Cobra CPI 1550 Operating Instructions Manual preview
CPI 1550
Brand: Cobra Pages: 14
Xnexus NXS 150 Operating Manual preview
NXS 150
Brand: Xnexus Pages: 20

Brands by name

Popular brands

Load more brands