manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

MU128 Guided Tour

29

English

Powering Up

Admittedly this is a simple operation, but you should be careful to follow the
instructions below to avoid possible damage to your equipment and speakers.

 Operation

1

Turn on the power of your MIDI keyboard.

2

Turn on the power of the MU128.
Press the STAND BY/ON switch.

After the animated greeting display finishes, the following dis-
play appears:

      

3

Turn down all volume controls.
This includes the MU128 and any connected equipment.

4

Turn on the amplifier/speaker system.

5

Set the volume controls.
First, set the volume control on the MU128 to about the midway
position, then set the volume on the amplifier to a suitable level.

Powering Down

When you turn the power off, make sure to do it in the following order:
1) Amplifier/speaker system
2) MU128
3) Other connected equipment (MIDI keyboard, etc.)

This prevents possible damage to the speakers.

Powering up

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

D&H DH05C User Manual preview
DH05C
Brand: D&H Pages: 70
Olimpia splendid maeStro Pro Instructions For Use And Maintenance Manual preview
maeStro Pro
Brand: Olimpia splendid Pages: 47
Xantrex PROwatt 1750 Owner'S Manual preview
PROwatt 1750
Brand: Xantrex Pages: 78
Xanter 806-1020 Installation Manual preview
806-1020
Brand: Xanter Pages: 54
Mitsubishi FREQROL-Z200-UL Instruction Manual preview
FREQROL-Z200-UL
Brand: Mitsubishi Pages: 120
Thiele UIPSW-2U3KVA User Manual preview
UIPSW-2U3KVA
Brand: Thiele Pages: 18
Samlexpower samlexsolar SPB-EXPLORE200 Installation Manual preview
samlexsolar SPB-EXPLORE200
Brand: Samlexpower Pages: 2
Phoenix Contact FL MC 10BASE-T/FO G850 Manual preview
FL MC 10BASE-T/FO G850
Brand: Phoenix Contact Pages: 7
Casti CAX-01 Quick Start Manual preview
CAX-01
Brand: Casti Pages: 4
Missing Link ML-11A User Manual preview
ML-11A
Brand: Missing Link Pages: 8
Uhlenbrock Elektronik 75900 User Manual preview
75900
Brand: Uhlenbrock Elektronik Pages: 4
AV Access 4KCVH2H User Manual preview
4KCVH2H
Brand: AV Access Pages: 20
SystemBase Multi-1/USB Ver4.0 User Manual preview
Multi-1/USB Ver4.0
Brand: SystemBase Pages: 63
SALUPO IRIS BLUE 3 SQ727 Series Instruction And Installation Manual preview
IRIS BLUE 3 SQ727 Series
Brand: SALUPO Pages: 28
Black Box DFCS 4Tx/L2 User Manual preview
DFCS 4Tx/L2
Brand: Black Box Pages: 2
Hall Research Technologies HRT-EMX-HD-AUD User Manual preview
HRT-EMX-HD-AUD
Brand: Hall Research Technologies Pages: 5
Cairn MULTI SPLIT V2 Quick Start Manual preview
MULTI SPLIT V2
Brand: Cairn Pages: 5
Micronix MSG703 Manual preview
MSG703
Brand: Micronix Pages: 16

Brands by name

Popular brands

Load more brands