66
MU128 Guided Tour
Making Changes to Individual Drum Sounds — the “Drum” Parameters
The Drum parameters provide extraordinary flexibility, since they allow you
to make independent settings for the individual drum/percussion sounds in a
Drum Part. We’ll explore a couple of the possiblilities here:
Operation
1
Select “DRUM” from the Edit menus (with the [SELECT
<
/
>
]
buttons) and press [ENTER].
2
Select “E3: Conga L.”
Play E3 on the connected MIDI keyboard, or use the [PART
-
/
+
] buttons to select “E3.”
Details
In the Drum parameters you cannot use the [PART
-
/
+
] buttons to select a Part;
they are reserved for selecting notes/sounds only.
3
Select the Pitch Coarse parameter, and set it to “-22.”
Use the [SELECT
<
/
>
] buttons to select the parameter, then the
[VALUE
-
/
+
] buttons or data dial. This setting creates a deep
log drum sound.
4
Select the Velocity Pitch Sensitivity parameter (VelPchSens), and
set it to “+12.”
Again use the [SELECT
<
/
>
] buttons, then the [VALUE
-
/
+
]
buttons or data dial. Play the key softly to strongly and notice
how the pitch changes according to key velocity.
Editing in the Multi Mode
