manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

158

MU128 Utility Mode

System Functions (SYSTEM)

Mute Lock

Settings:

off, on

This determines whether or not the Part Mute
status of the MU128 is reset when receiving
a GM System On or XG System On mes-
sage. Generally, this message is automatically
transmitted to the MU128  as part of GM or
XG song data. When Mute Lock is set to off,
this resets the Mute status of the Parts on the
MU128. If you want to keep the current Mute
settings and disable this reset, set Mute Lock
to  on.  This setting affects the Multi mode
only, and not the Performance mode. (For
more information on the Mute function, see
page 95.)

Hint
You should set this to “on” when repeatedly
playing back song data for which you want
to keep certain Parts muted.  This prevents
the mute settings from being reset each time
you play the song.

A/D Part Lock

Settings:

off, on

This determines whether or not the cur-
rent parameter values and Insertion/Varia-
tion effect settings of the A/D Parts are
reset when receiving a GM System On
or XG System On message. If you want
to keep the current parameter values and
Insertion/Variation settings of the A/D
Parts, set A/D Part Lock to on. This pa-
rameter has no effect in the Performance
mode.

Hint
• Set this to “off” when playing back XG-

compatible song data.

• When this is set to “on,” all A/D Part set-

tings are maintained, even when “XG Sys-
tem On” or “GM System On” messages are
received.  This is convenient when playing
back song data and using a microphone
with the A/D Inputs.

Multi Mode Equalizer Lock
(Mlt EQ Lock)

Settings:

off, on

This determines whether the Equalizer set-
tings (page 155) are initialized or change in
response to incoming MIDI messages.
When this is set to “on,” the current Equal-
izer settings are maintained, ignoring any
EQ-related messages that are received with
XG System On or GM System On mes-
sages, allowing you to protect your origi-
nal Equalizer settings. When set to “off,”
the Equalizer changes according to incom-
ing XG/GM System On messages. This
setting affects the Multi mode only, and not
the Performance mode.

NOTE
This parameter has no effect on the individual
Part EQ settings (page 116).

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

ABB PVS980-58 Commissioning And Maintenance Manual preview
PVS980-58
Brand: ABB Pages: 62
Samson 6111 Mounting And Operating Instructions preview
6111
Brand: Samson Pages: 28
Paton ProMIG-200 Data Sheet And Operating Manual preview
ProMIG-200
Brand: Paton Pages: 37
XS Scuba R250 Conversion Manual preview
R250
Brand: XS Scuba Pages: 4
Fagor SV2 Installation Manual preview
SV2
Brand: Fagor Pages: 12
Lenze i510-Cabinet Manual preview
i510-Cabinet
Brand: Lenze Pages: 132
National Instruments GPIB-RS232 Installation Manual preview
GPIB-RS232
Brand: National Instruments Pages: 4
SunSynk FSPKL2N User Manual preview
FSPKL2N
Brand: SunSynk Pages: 10
Lake People ADC F444 User Manual preview
ADC F444
Brand: Lake People Pages: 28
Baumer CANopen HMG 10 Installation And Operating Instructions Manual preview
CANopen HMG 10
Brand: Baumer Pages: 36
Hall Research Technologies SC-HD2SDI User Manual preview
SC-HD2SDI
Brand: Hall Research Technologies Pages: 8
Sinexcel PWS1-500KTL-NA User Manual preview
PWS1-500KTL-NA
Brand: Sinexcel Pages: 49
Manhattan 207959 Instructions preview
207959
Brand: Manhattan Pages: 2
National Communications BMS-1 User Manual preview
BMS-1
Brand: National Communications Pages: 20
Renovo Digiwatts RN3000US Installation Manual preview
Digiwatts RN3000US
Brand: Renovo Pages: 54
e+p UHD 14 Manual preview
UHD 14
Brand: e+p Pages: 2
Hagstrom KE-USB108 User Manual preview
KE-USB108
Brand: Hagstrom Pages: 36
Morningstar SureSine 1000 W Installation And Operation Manual preview
SureSine 1000 W
Brand: Morningstar Pages: 66

Brands by name

Popular brands

Load more brands