manualshive.com logo in svg

Yamaha MU128, Owner'S Manual

The Yamaha MU128 offers exceptional sound quality and versatility for musicians. Explore its capabilities with the comprehensive Service Manual, available for free download at manualshive.com. This manual provides detailed instructions to enhance your user experience and unlock the full potential of this exceptional product.

Share
Download
background image

MU128 Multi Mode

115

English

Pitch EG Attack Time (PEGAtakTime)

Range:

–64 — +63

This determines the Attack Time of the
Pitch EG, or how long it takes for the pitch
to return to normal (from the pitch value
set in Initial Level above).

Pitch EG Release Level (PEGReleLvel)

Range:

–64 — +63

This determines the final pitch of the
Part’s Voice, or the pitch that is reached
after the note is released. A setting of 00
corresponds to normal pitch.

NOTE
The Pitch EG Release Level and Time param-
eters may have no effect if the Voice itself does
not sustain after the note is released. (Short
percussive Voices may fall into this category.)
Also make sure that the main EG Release Time
is set to an appropriate value so that the sound
sustains.

Pitch EG Release Time (PEGReleTime)

Range:

–64 — +63

This determines the Release Time of the
Pitch EG, or how long it takes for the pitch
to change to the pitch value set in Release
Level above.

Multi Edit Mode

Summary of Contents for MU128




































































































































































































Reviews:

No comments

Related manuals for MU128

Clearline V210 Manual preview
V210
Brand: Clearline Pages: 4
Varan VAR-MIGMMA160 User Manual preview
VAR-MIGMMA160
Brand: Varan Pages: 27
Kramer VP-424 User Manual preview
VP-424
Brand: Kramer Pages: 15
ICT SITE INVERTER 300 Instruction Manual preview
SITE INVERTER 300
Brand: ICT Pages: 8
Advantech B+B SmartWorx 485USB9F-2W Quick Start Manual preview
B+B SmartWorx 485USB9F-2W
Brand: Advantech Pages: 2
DeLOCK 86441 User Manual preview
86441
Brand: DeLOCK Pages: 2
Transition Networks SPOEB1011-105 User Manual preview
SPOEB1011-105
Brand: Transition Networks Pages: 16
La Boite Concept LP160 User Manual preview
LP160
Brand: La Boite Concept Pages: 52
Saftronics FP5 Series User Manual preview
FP5 Series
Brand: Saftronics Pages: 101
Wacker Neuson G 3.3AE Operator'S Manual preview
G 3.3AE
Brand: Wacker Neuson Pages: 36
DGFLOW STEADYPRES M/M 11 Operator And Maintenance Manual preview
STEADYPRES M/M 11
Brand: DGFLOW Pages: 47
Bose SoundDock Series II Owner'S Manual preview
SoundDock Series II
Brand: Bose Pages: 16
Ryobi AUN9230TT Operator'S Manual preview
AUN9230TT
Brand: Ryobi Pages: 14
Quantum Harvest 5000-60 TSW Owner'S Manual preview
5000-60 TSW
Brand: Quantum Harvest Pages: 33
Gree NRQD16G/A-S Owner'S Manual preview
NRQD16G/A-S
Brand: Gree Pages: 19
HP 202A Operating And Service Manual preview
202A
Brand: HP Pages: 47
HP 3245A Manual preview
3245A
Brand: HP Pages: 59
HP 6038A Service Manual preview
6038A
Brand: HP Pages: 111

Brands by name

Popular brands

Load more brands