Pattern Jobs
MOTIF XF Reference Manual
184
V
oice mode
Song mode
P
a
tter
n mode
Mixing mode
Mast
er mode
Utility mode
F
ile mode
P
erf
or
mance
mode
Sampling
mode 1
Sampling
mode 2
R
e
fe
rence
This Job splits a selected Phrase (
1
) into two separate
Phrases (
1
and
2
). Phrase
1
is divided at the Split Point
(
3
).
1
Original Phrase
Determines the original Phrase to be split by selecting the
Pattern number (01 – 64) and Phrase number (001 – 256).
Executing the Job leaves the part before the Split Point (
3
)
of the original Phrase.
2
Destination Phrase
Determines the split destination Phrase by selecting the
Pattern number (off, 01 – 64) and Phrase number (off, 001 –
256). Executing the Job copies the part after the Split Point
to this split destination Phrase. When either the Pattern or
the Phrase is set to “off,” the part after the Split Point of the
original Phrase will be deleted.
NOTICE
This Job overwrites any data already existing in the split
destination Phrase (
2
).
3
Split Point Measure
Determines the measure (002 – 256) at which the Phrase
will be split.
This Job copies a segment of sequence-track data from a
Song into the designated destination Phrase. This Job is
useful when you’ve found a drum or bass pattern in a Song
and want to use it in the Pattern.
1
Source Song, Track and Measures
Determines the source Song number (01 – 64), Track
number (01 – 16) and measure range (001 – 999) of the
Song. If the specified measure range is more than 257, an
alert message will appear on the display and the Job will
be aborted. If this occurs, set the Measure again so that
this range is within 256 measures.
2
Destination Phrase
Determines the destination Phrase by selecting the Phrase
number (001 – 256). The destination Phrase can be
specified among the Phrases of the current Pattern.
NOTICE
Any previous data in the copy destination will be overwritten.
3
Copy Sample Voice
When the Copy Sample box is checkmarked, Sample
Voices used in the source data are copied to the
destination Phrase as Sample Voices, and are assigned to
the destination Pattern track. Make sure to set this
parameter to on when copying a track using a Sample
Voice. When there is no memory available in the destination
Pattern (current Pattern) for Sample Voice data, an alert
message will appear on the display and the Sample Voice
data will not be copied. If this occurs, use Sample Job 02:
Delete to delete any unused samples, then try again.
NOTICE
Undo/Redo cannot be used to undo/redo a Sample Voice copy
operation.
This Job copies a selected user Phrase into a specified
area of a selected Song.
1
Source Phrase
Determines the Phrase number (001 – 256) to be copied.
2
Destination Song, Track and Measure
Determines the destination Song number (01 – 64), Track
number (01 – 16) and measure range (001 – 999).
NOTICE
The copy operation overwrites any data previously existing on the
destination track and measure range.
3
Copy Sample Voice
When the Copy Sample box is checkmarked, Sample
Voices used by the source Phrase are copied to the
destination Song as Sample Voices, and are assigned to
the destination Song track. Make sure to set this parameter
to on when coping a Phrase using a Sample Voice. When
there is no memory available in the destination Song for
Sample Voice data, an alert message will appear on the
05: Split Phrase
06: Get Phrase from Song
1
3
2
1
2
3
07: Put Phrase to Song
1
2
3
