Yamaha FX10X 2008, Service Manual

Page: 39 / 411

2-22
INSP
ADJ
ENGINE OIL REPLACEMENT
13. Install:
• Drain bolts
(along with the new gaskets)
14. Fill:
• Engine oil
(with the specified amount of the recom-
mended engine oil)
Add 2.0 L (1.76 Imp qt, 2.11 US qt) of the rec-
ommended engine oil to the oil tank, and then
install and tighten the oil level gauge and the
cylinder head oil filler cap.
15. Inspect:
• Engine and oil tank
(for oil leaks)
16. Inspect:
• Engine oil level
Refer to “ENGINE OIL LEVEL INSPECTION”.
T
R
.
.
Oil tank engine oil drain bolt:
16 Nm (1.6 m · kg, 11 ft · lb)
Oil pan engine oil drain bolt:
10 Nm (1.0 m · kg, 7.2 ft · lb)
Quantity:
Total amount:
3.90 L (3.43 Imp qt, 4.12 US qt)
Periodic oil change:
3.00 L (2.64 Imp qt, 3.17 US qt)
With oil filter cartridge replace-
ment:
3.20 L (2.82 Imp qt, 3.38 US qt)
17. Inspect:
• Engine oil pressure
Inspection steps:
• Slightly loosen the oil check bolt
1
.
• Start the engine and keep it idling until engine
oil starts to seep from the oil check bolt.
If no engine oil comes out after one minute, turn
the engine off so that it will not seize.
• Check the engine oil passages, the oil filter and
the oil pump for damage or leakage.
• Start the engine after solving the problem(-s)
and check the engine oil pressure again.
Tighten the oil check bolt to specification.
T
R
.
.
Oil check bolt:
20 Nm (2.0 m · kg, 14 ft · lb)
1