Yamaha FX10X 2008, Service Manual

Page: 349 / 411

8-37
– +
ELEC
SIGNAL SYSTEM
Check the main fuse, ignition fuse, and signal fuse.
Refer to “FUSE INSPECTION” in CHAPTER 2.
Check the battery.
Refer to “BATTERY INSPECTION” in CHAPTER 2.
Check the stator coil.
Refer to “CHARGING SYSTEM”.
Check the engine stop switch and main switch.
Refer to “IGNITION SYSTEM”.
Check the load control relay.
Refer to “LIGHTING SYSTEM”.
Check the DC back buzzer.
Check the signal system wiring.
Refer to “CIRCUIT DIAGRAM”.
Correct the connection and/or replace the rectifier/
regulator and/or ECU.
BACK BUZZER DOES NOT SOUND. (FX10/FX10RTR/FX10RTRA/FX10MTR/FX10MTRA)
OK
FAULTY Replace the main fuse, ignition fuse, and/or signal
fuse.
OK
OUT OF SPECIFICATION
Replace or charge the battery.
Refer to “BATTERY INSPECTION” in CHAPTER
2.
OK
OUT OF SPECIFICATION Replace the stator coil.
OK
FAULTY
Replace the right handlebar switch and/or main
switch.
OK
FAULTY Replace the load control relay.
OK
DOES NOT SOUND
Replace the DC back buzzer.
OK
FAULTY Properly connect or repair the signal system wir-
ing.