Yamaha FX10X 2008, Service Manual

Page: 193 / 411

5-7
ENG
EXHAUST PIPE AND MUFFLER
INSTALLATION
1. Install:
• Exhaust pipe
1
(temporarily)
NOTE:
Install the exhaust pipe to the brackets on the
frame, making sure to position it as far rearward as
possible, and then temporarily tighten the exhaust
pipe bolts.
2. Install:
• Exhaust pipe joint gasket
• Exhaust pipe joint
• Exhaust pipe band
NOTE:
• After installing the exhaust pipe joints, fit the
exhaust pipe into them.
• Temporarily tighten the exhaust pipe band bolts;
do not torque them at this point.
1
New
3. Install:
• Muffler band
1
• Muffler
NOTE:
• Align the projection
a
on the muffler band with
the slot
b
on the muffler.
• Temporarily tighten the muffler band bolt and
muffler bolts; do not torque them at this point.
4. Tighten:
• Exhaust pipe band bolts
5. Tighten:
• Muffler bolts
NOTE:
First tighten the bolts on the rear side of the muffler,
and then tighten the bolts on the front side.
T
R
.
.
Exhaust pipe band bolt:
9 Nm (0.9 m · kg, 6.5 ft · lb)
T
R
.
.
Muffler bolt:
23 Nm (2.3 m · kg, 17 ft · lb)
b
a
1