Yamaha FX10X 2008, Service Manual

Page: 310 / 411

7-34
FI
THROTTLE BODY
INSPECTION AND ADJUSTMENT
1. Inspect:
• Throttle position sensor
Inspect steps:
• Disconnect the throttle position sensor coupler.
• Remove the throttle position sensor from the
throttle body.
• Connect the pocket tester (
Ω ×
1k) to the throt-
tle position sensor.
• Measure the maximum throttle position sensor
resistance.
Out of specification
→
Replace the throttle posi-
tion sensor.
Positive tester probe
→
Blue terminal
1
Negative tester probe
→
Black/Blue terminal
2
Maximum throttle position sensor
resistance:
2.64 ~ 6.16 k
Ω
at 20 °C (68 °F)
(Blue – Black/Blue)
L B/L Y
1 2
2. Adjust:
• Throttle position sensor angle
Adjustment steps:
• Connect the fuel injection system sub-wire har-
ness coupler to the wire harness.
• Connect the digital circuit tester to the throttle
position sensor.
Positive tester probe
→
Yellow terminal 1
Negative tester probe
→
Black/Blue terminal
2
Digital circuit tester:
90890-03174
Model 88 Multimeter with tachome-
ter:
YU-A1927
L B/L Y
1 2