Yamaha FX10X 2008, Service Manual

Page: 273 / 411

6-11
COOL
WATER PUMP
4. Install:
• Rubber damper holder
1
• Rubber damper 2
NOTE:
Before installing the rubber damper, apply tap
water or coolant onto its outer surface.
5. Measure:
• Impeller shaft tilt
Out of specification
→
Repeat steps (4) and
(5).
CAUTION:
Make sure the rubber damper and rubber
damper holder are flush with the impeller.
1
Straightedge
2 Impeller
Max. impeller shaft tilt:
0.15 mm (0.0059 in)
1
2
1
2
INSTALLATION
1. Align:
• “I” mark
a
on the AC magneto rotor
(with the stationary pointer
b
on the AC mag-
neto cover)
NOTE:
Turn the crankshaft clockwise.
2. Install:
• Water pump assembly
T
R
.
.
Water pump assembly bolt:
12 Nm (1.2 m · kg, 8.7 ft · lb)
a
b