Yamaha DVR-1000, Owner'S Manual

Page: 50 / 484

Sound controls
48
En
■
Night listening mode
When night listening mode is activated, high volume
output is softened and low volume output raised to an
audible level. This is useful for watching your favorite
action movie without disturbing others at night.
– Press
NIGHT
on the remote control to activate the
night listening mode.
→
Playback continues at a more even volume and
“
NIGHT ON
” appears in the display panel.
– To restore the volume, press NIGHT again.
→
Playback continues with the full dynamic range of
surround sound, and “
NIGHT OFF
” appears in the
display panel.
– The night listening mode and the music enhancer
cannot be activated at the same time.
– When the CD upsampling function is activated (or
a disc recorded at the sampling rate of 96 kHz is
played back), night listening mode is not available.
■
Adjusting the treble/bass level
The TREBLE (high tone) and BASS (low tone) features
enable you to define the sound-processor settings.
1
Press TREBLE or BASS on the remote control.
2
Within three seconds, press VOLUME (+/–) to adjust
the treble or bass level (-6dB to +6dB, in 1dB
increments).
→
If the volume control is not used within three
seconds, it will resume its normal volume control
function.
■
Adjusting the volume level
Use the VOLUME control (or press VOLUME (+/–) on
the remote control) to increase or decrease the volume
level.
→
“
VOL MIN
” is the minimum volume level and “
VOL
MAX
” is the maximum volume level.
To mute the volume temporarily
Press MUTE on the remote control.
– Playback continues without sound and “
MUTE
” appears.
– To restore the volume, press MUTE again or increase/
decrease the volume level.
Notes