Crossover Processor
107
DME32—Owner’s Manual
3-Way Processor
The 3-Way Processor component splits the input signal into three frequency chan-
nels—high, mid, and low—with delay, 3-band PEQ, and compressor on each channel.
The 3-Way Processor component features one input
and three outputs: High, Mid, and Low.
The following block diagram offers an overview of the 3-Way Processor.
The 3-Way Processor control window features INPUT, OUTPUT, and control sections,
with DELAY, CROSS, EQ, and COMP pages selected by clicking the tabs along the top
of the control window, as shown below.
The INPUT and OUTPUT sections of the control window are displayed regardless of
which tab is clicked, and their parameters are explained in the following table.
Section
Parameter
Range
Description
INPUT
LEVEL
–Infinity dB to 0.0 dB Adjusts the input signal level
MUTE
ON/OFF
Mutes the input
OUTPUT LOW
LEVEL
–Infinity dB to 0.0 dB Adjusts the low output signal level
MUTE
ON/OFF
Mutes the low output
PHASE
NOR/REV
Inverts the low output signal
OUTPUT MID
LEVEL
–Infinity dB to 0.0 dB Adjusts the mid output signal level
MUTE
ON/OFF
Mutes the mid output
PHASE
NOR/REV
Inverts the mid output signal
OUTPUT HIGH
LEVEL
–Infinity dB to 0.0 dB Adjusts the high output signal level
MUTE
ON/OFF
Mutes the high output
PHASE
NOR/REV
Inverts the high output signal
Input
High
Delay
HPF
3-band
PEQ
Comp
Output
Mid
Delay
HPF
HPF
LPF
3-band
PEQ
Comp
Output
Low
Delay
LPF
3-band
PEQ
Comp
Output
