Restricting Access to the DME32
207
DME32—Owner’s Manual
Changing the Password
The set password can be changed as follows.
1
Select a component, parameter, and value.
The cursor must be in the VALUE section of the display, as shown below.
2
Adjust the DATA wheel or press the [INC] or [DEC] button.
The Enter password display appears, as shown below.
3
Enter an incorrect password.
An asterisk appears as each number is entered, as shown below.
4
Press the [RECALL] button.
The Change password display appears, as shown below.
5
Enter the old password, and then press the [RECALL] button.
The New password display appears, as shown below.
6
Enter the new password, and then press the [RECALL] button.
The new password is set.
SCENE NO.
CONFIGURATION
SCENE
8Ch
X
Aut
X
MASTER
XXXXXX
0dB
Setup
X
A
X
Female Chorus
_
0 i
SCENE NO.
CONFIGURATION
SCENE
XXXX
password
X
=
Enter
X
password
0 i
SCENE NO.
CONFIGURATION
SCENE
XXXX
password
X
=
X
****
Enter
X
Password
0 i
SCENE NO.
CONFIGURATION
SCENE
Old
X
password
X
=
X
Change password?
0 i
SCENE NO.
CONFIGURATION
SCENE
New
X
password
X
=
X
Enter
X
password
0 i
