74
Chapter 6—Running the System
DME32—Owner’s Manual
Recalling Configurations
In Run mode, configurations can be recalled from the DME32 front panel (see
page 198) or from DME Manager. Either way, the recall is reflected on both the DME32
and DME Manager. This section explains how to recall DME32 configurations from
DME Manager.
In a multiple-unit system, the selected configuration is recalled on all DME32s via the
cascade connections.
1
Select Run mode.
See “Selecting Run Mode” on page 66 for more information.
The Run Mode Controller appears. See “Run Mode Controller” on page 67 for more
information.
2
Click the Scene/Config button to select configuration control, as shown
below.
3
Use the selector buttons to select a configuration memory.
On the Run Mode Controller, the number of the selected configuration flashes and its
title appears. Only configuration memories that contain data can be recalled. When an
empty configuration memory is selected, the Recall button is unavailable.
4
To recall the selected configuration, click Recall.
The selected configuration is recalled on the DME32, the last recalled scene of that con-
figuration is recalled, and the component parameters are set accordingly. The configu-
ration and scene titles appear on the DME32 display. On the Run Mode Controller, the
number of the recalled configuration stops flashing.
If open, the corresponding configuration window becomes the current window and the
number and title of the recalled configuration appear the title bar. If the corresponding
configuration window is not open, the message “Receive data from DME32?” appears.
Click OK to receive the configuration data from the DME32.
Note: When recalling a configuration, be aware that volume levels may change abruptly
as the system is reconfigured—nobody likes sudden loud noises, or worse, speaker damage.
