18
Chapter 3—Touring the DME32
DME32—Owner’s Manual
Q
CARD eject button
This button is used to eject PC Cards. See “Inserting & Ejecting PC Cards” on page 222
for more information.
R
UTILITY button & indicator
This button is used to access the utility functions. The UTILITY indicator lights up
when the [UTILITY] button is pressed.
S
VALUE button & indicator
This button is used to select the VALUE section of the display. When pressed, the cursor
moves to the VALUE section of the display and the VALUE indicator lights up.
T
USER DEFINE button & indicator
This button can provide direct access to a specified parameter. The USER DEFINE indi-
cator lights up when the [USER DEFINE] button is pressed. See “Editing Parameters &
the User Define Button” on page 201 for more information.
U
Cursor buttons
(
/
)
These buttons are used to move the cursor around the display. The left (
) cursor but-
ton moves the cursor to the left; the right (
) cursor button moves it to the right.
V
POWER switch
This switch is used to turn on the power to the DME32. See “Turning On & Off the
DME32” on page 11 for more information.
There are two M3 screw holes above and below the POWER switch, 34 mm apart, for
attaching a protective cover. Yamaha does not offer such a cover, so it must be sourced
by the user.
